One-Time Upgrade of the NXB-KNX to a Native NetLinx Device
Determining the Current Firmware Version Of the NXB-KNX
Select Firmware Upgrade from the Admin menu to open the Firmware Upgrade Manager page (FIG. 34).
Use the options on the page to upgrade the firmware on this NXB-KNX unit.
FIG. 34
Firmware Upgrade Manager page
This page allows you view information on the firmware version currently loaded on this unit, and to upload a
firmware .JAR file to the unit.
Another method of determining the current firmware version is to establish a telnet
session to the NXB-KNX. See Establishing a Terminal Connection Via Telnet section
on page 51.The Welcome banner in item 4 indicates the current firmware version.
Browse For the New Firmware Upload File
Select the Browse button to open a standard file display for traversing your PC's file structure, and selecting an
individual .JAR file.
The selected file name is displayed in the associated text box.
Click the Accept button to initiate the download of the selected .JAR file to the unit.
Click the Reboot button to initiate a system reboot. Firmware changes only take effect after a reboot.
System information will not be updated until after a system reboot.
If Current Firmware Version Is Lower Than v1.0.36
1.
Select Firmware Upgrade from the Admin drop-down menu to open the Firmware Upgrade Manager
page (FIG. 34 on page 48).
2.
Click Browse, and select the file: XXXX1.0.36.jar.
3.
Click Accept.
4.
When the upgrade is complete, reboot the NXB-KNX.
48
If the download fails for any reason, an error message is displayed indicating the failure.
If the download is successful, a message is displayed.
NXB-KNX Operation/Reference Guide