Port Settings - AMX NetLinx Interface NXB-KNX Operation/Reference Manual

Configuration

Port Settings

Select Port Settings from the Admin drop-down menu to open the Port Settings page (FIG. 15). Use the
options on the page to specify various Port settings for this NXB-KNX unit.
FIG. 15 Port Settings page
The options on this page provide inputs for enabling and disabling of HTTP, HTTPS, Telnet, SSH and FTP
ports, and allow you to change each port number from its standard default assignment.
12
Restore Factory Defaults: Click to restore all Port settings to the factory defaults.
HTTP Port Number: • Default = enabled
• Default port number = 80
HTTPS Port Number: • Default = enabled
• Default port number = 443
Telnet Port Number: • Default = enabled
• Default port number = 23
SSH Port Number: • Default = enabled
• Default port number = 22
FTP Port Number: • Default = enabled
• Default port number = 21
Reboot: • Click to initiate a system reboot.
• Port changes only take effect after a reboot.
NXB-KNX Operation/Reference Guide