Security Settings; Enable / Disable Security Settings - AMX NetLinx Interface NXB-KNX Operation/Reference Manual

To establish communication between the NXB-KNX and a specific NetLinx Master:
1.
Enter the Master's IP/URL in the Master IP/URL text field.
2.
The default Master Port Number assignment is 1319 - do not change this number.
3.
Under Authentication Settings, enter the NetLinx Master's Username and Password (only required if the
target NetLinx Master has Authentication enabled).
4.
Press Accept to save changes.
5.
Press Reboot to reboot the NXB-KNX. Once rebooted, the NXB-KNX should be in communication with
the Specified NetLinx Master (indicated by a steady blink on the NXB-KNX Status LED).

Security Settings

Select Security Settings from the Admin menu to open the Security Settings page (FIG. 12). Use the options
on the page to specify security options and login information for this NXB-KNX unit.
FIG. 12 Security Settings page

Enable / Disable Security Settings

NXB-KNX Operation/Reference Guide
Web Security: Click this checkbox to enable Web Security.
When Web security is enabled, a username and password are
required to access any system Web pages.
Default = disabled
Telnet Security: Click this checkbox to enable Telnet Security.
With Telnet Security enabled, a username and password are
required to establish a Telnet or SSH connection.
Default = disabled
Admin Security: Click this checkbox to enable Admin Security.
With Admin Security enabled, a username and password are
required to modify any system configuration item.
Default = disabled
Restore Factory Defaults: Click to restore all security settings to their factory defaults.
Default = All Disabled
Configuration
9