Clock Manager - Daylight Savings - AMX NetLinx Interface NXB-KNX Operation/Reference Manual

Configuration
The options on the Mode Manager page provide inputs for selecting the current mode of the system time:

Clock Manager - Daylight Savings

Select Daylight Savings from the Clock Manager sub-menu (or from the main Clock Manager page), and the
Daylight Savings Manager page will be displayed (FIG. 19):
FIG. 19 Clock Manager - Daylight Savings Manager page
Note that this tab is enabled only if Network Time is selected (on the Mode Manager page).
14
Time Sync: Use the radio buttons to select either Network Time or StandAlone.
Note: If using StandAlone mode, the time will be valid only until the unit is
rebooted. Once the unit is rebooted, the time will be lost, and will have to be
reset.
Note that the Daylight Savings and NIST Servers tabs are enabled only if
Network Time is selected as the mode.
Re Sync Period: Select the desired re-synch period for the clock from this drop-down menu. Re-
synch period options include 5 minutes, 15 minutes, 1, 2 and 4 hours
(default = 1 hour).
Timezone: Select the appropriate Time Zone from the drop-down menu.
Date: Use these fields to manually enter today's date (mm/dd/yyyy).
Time: Manually enter the current time (hh:mm:ss).
Click Accept to save your changes. Note that changes on this page take effect immediately.
Click Cancel to cancel any changes.
NXB-KNX Operation/Reference Guide