Adding The Virtual Device To The Ets3 Project - AMX NetLinx Interface NXB-KNX Operation/Reference Manual

Cross-Line Communication
FIG. 24 Selective Import dialog
4.
Verify that NXB-KNX is selected, and click Import.

Adding the Virtual Device to the ETS3 Project

Once the import procedure is complete, the virtual device must be added to the ETS3 project:
1.
Identify the appropriate Area and Line at which the physical NXB-KNX will be connected, and
right-click on the Line name (heading) to access the context menu (FIG. 25):
FIG. 25 ETS3 - Topology in Default Project - context menu
2.
Select Add Devices to invoke the Product Finder dialog (FIG. 26):
40 NXB-KNX Operation/Reference Guide