Table of Contents
Advertisement
MBR1400 | USER MANUAL – Firmware version 4.4
CRADLEPOINT
Choose a personalized WPA PASSWORD or WEP KEY. This password will be used to connect devices to the
router's WiFi broadcast once the security settings have been saved.
WPA Password: The WPA Password must be between 8 and 64 characters long. A combination of upper and
lower case letters along with numbers and special characters is recommended to prevent hackers from gaining
access to your network.
WEP Key: A WEP Key must be either a hexadecimal value of 5 or 13 characters or a text value of 10 or 26
characters.
Click NEXT.
7) Configuring Your Access Point Name (APN):
If you are using a SIM-based modem (LTE/GSM/HSPA) with your CradlePoint router, you may need to configure the
APN before it will properly connect to your carrier. Wireless carriers offer several APNs, so check with your carrier to
confirm the appropriate one to use. Some examples include:
AT&T: "broadband"
T-Mobile: "epc.tmobile.com"
Rogers LTE: "lteinternet.apn"
Bell: "inet.bell.ca"
TELUS: "isp.telus.com"
You can either leave this on the Default setting
or select Manual and input a specific APN.
If your specific modem or SIM already has APNs
programmed into it, you should leave this on the
Default setting. After finishing this Wizard go to Internet → Connection Manager, select your modem, and edit the
settings. The SIM PIN/APN tab has more available settings than are provided here.
© 2013 CRADLEPOINT, INC.
PLEASE VISIT
HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/
FOR MORE HELP AND RESOURCES
PAGE 32
Advertisement
Table of Contents
