Table of Contents
Advertisement
MBR1400 | USER MANUAL – Firmware version 4.4
CRADLEPOINT
STP: (requires hardware version 2.0)
Spanning Tree Protocol (STP) allows a network design to
include redundant paths while preventing broadcast radiation
from bridge loops.
Enable STP: Enable Spanning Tree Protocol loop detection.
Bridge Priority: Set the priority of the bridge. When
determining the root bridge of the spanning tree topology, the
bridge priority is compared first. The bridge with the lowest
priority value will win. If you want this router to be the root
bridge, then set it to a value less than the default of 32768. A
valid priority value is between 0 and 65535.
© 2013 CRADLEPOINT, INC.
PLEASE VISIT
HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/
FOR MORE HELP AND RESOURCES
PAGE 113
Advertisement
Table of Contents
