Table of Contents
Advertisement
MBR1400 | USER MANUAL – Firmware version 4.4
CRADLEPOINT
WiFi Settings (Advanced)
6.8.4
When you select the Wireless (WiFi) Networks Settings tab in the Local Network Interfaces section, you have several
additional options for configuring your wireless LANs under the WiFi Settings heading.
WiFi band: Select the range of frequencies the router will
use. The MBR1400 can operate in either the 2.4 GHz or
the 5.0 GHz ranges. (Default: 2.4 GHz. The included
WiFi antennas are 2.4 GHz. 5 GHz antennas are
available as an accessory.)
Channel Selection Method: This controls how a WiFi
channel is selected.
User Selection. Manually set the channel.
Random Selection. The router randomly sets the
channel.
Smart Selection (Default). Scans to determine
the lowest interference WiFi channel.
Channel Selection Schedule: When using the "Smart"
channel selection, this controls whether the router will
periodically rescan for a better channel and change to it.
Select from "Once," "Daily," "Weekly," or "Monthly." Note
that there may be a momentary WiFi disconnection while
the channel changes.
Optimize WiFi/WiMAX coexistence: (Shows if Smart
Selection or Random Selection is chosen and the WiFi
Band is 2.4 GHz.) Setting this will lessen any possible
conflict with WiFi in the 2.4 GHz band and an attached
WiMAX modem. If a WiMAX modem is attached to the
router when the WiFi is enabled, the WiFi channel and
transmit power will be set to levels that optimize the performance of the WiMAX modem. If no WiMAX modem is attached,
then default channel and power settings will be used even if this is selected.
© 2013 CRADLEPOINT, INC.
PLEASE VISIT
HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/
FOR MORE HELP AND RESOURCES
PAGE 121
Advertisement
Table of Contents
