Table of Contents
Advertisement
MBR1400 | USER MANUAL – Firmware version 4.4
CRADLEPOINT
Modem Settings
7.1.7
Not all modems will have all of the options shown below; the available options are specific to the modem type.
On Demand: Typically modem connections are not always on. When this mode is selected a connection to the Internet is
made as needed. When this mode is not selected a connection to the Internet is always maintained.
Aggressive Reset: When Aggressive Reset is enabled
the system will attempt to maintain a good modem
connection. If the Internet has been unreachable for a
period of time, a reset of the modem will occur in attempt
to re-establish the connection.
Network-Initiated Alerts: This field controls whether the
Sprint network can disconnect the modem to apply
updates, such as for PRL, modem firmware, or
configuration events. These activities do not change any
router settings, but the modem connection may be
unavailable for periods of time while these updates occur.
The modem may also require a reset after a modem
firmware update is complete.
Disabled: The request to update will be refused.
When Disconnected: The request to update will only be performed when the modem is either in a disconnected
state or dormant state. If the modem is not in one of these states when the request is received, then the router will
remember the request and perform the update when the modem becomes disconnected/dormant.
On Schedule: The request to update will only be performed at the specified scheduled time, no matter what the
state of the modem is.
Network-Initiated Schedule: When you select "On Schedule" for Network-Initiated Alerts, you also select a time from
this dropdown list. Modem updates will take place at this scheduled time.
© 2013 CRADLEPOINT, INC.
PLEASE VISIT
HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/
FOR MORE HELP AND RESOURCES
PAGE 148
Advertisement
Table of Contents
