Table of Contents
Advertisement
MBR1400 | USER MANUAL – Firmware version 4.4
CRADLEPOINT
Static
As with IPv4, static configuration is available for situations where the WAN IPv6 topology is fixed.
IPv6 Address/CIDR – Input the IPv6 static IP address and mask length provided by your ISP (see
http://en.wikipedia.org/wiki/Classless_Inter-Domain_Routing
IPv6 Gateway IP – Input the IPv6 remote gateway IP address provided by your ISP.
Primary IPv6 DNS Server – (optional) Depending on your provider/setup, this may be required. This only takes
effect if the default global DNS setting on the Network Settings → DNS page is "Automatic".
Additional IPv6 DNS Server – Secondary DNS server.
Delegated IPv6 Network – (optional) Network available for delegation to LANs. Depending on your provider, this
may be required. Prefixes specified here only take effect if those supplied by the connection are insufficient to
configure your LANs.
Delegated IPv6 Network – Additional network available for delegation to LANs.
Example Configuration:
© 2013 CRADLEPOINT, INC.
PLEASE VISIT
HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/
for an explanation of CIDR).
FOR MORE HELP AND RESOURCES
PAGE 142
Advertisement
Table of Contents
