Table of Contents
Advertisement
MBR1400 | USER MANUAL – Firmware version 4.4
CRADLEPOINT
Local Management
8.1.3
Enable Internet Bounce Pages: Bounce pages
show up in your web browser when the router is
not connected to the Internet. They inform you
that you are not connected and try to explain
why. If you disable bounce pages then you will
just get the usual browser timeout. In the normal
case when the router is connected to the Internet
you don't see them at all.
Disable Signal Strength Button: This disables
the Signal Strength button on the physical router.
Local Domain: The local domain is used as the
suffix for DNS entries of local hosts. This is tied
to the hostnames of DHCP clients as
DHCP_HOSTNAME.LOCAL_DOMAIN.
System Identifier: This is a customizable identity that will be used in router reporting and alerting. The default value is the
MAC address of the router.
Require HTTPS Connection: Check this box if you want to encrypt all router administration communication.
Secure HTTPS Port: Enter the port number you want to use. The default is 443.
Enable SSH Server: When the router's SSH server is enabled you may access the router's command line interface (CLI)
using the standards-based SSH protocol. Use the username "admin" and the standard system password to log in.
SSH Server Port: Default: 22.
© 2013 CRADLEPOINT, INC.
PLEASE VISIT
HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/
FOR MORE HELP AND RESOURCES
PAGE 197
Advertisement
Table of Contents
