Table of Contents
Advertisement
MBR1400 | USER MANUAL – Firmware version 4.4
CRADLEPOINT
Interfaces:
Select network interfaces to attach to this network.
Choose from WiFi, Ethernet ports, and VLAN
interfaces. Double-click on any of the interfaces shown
on the left in the Available section to move them to
the Selected section on the right (or highlight an
interface and click the "+" button). To deselect an
interface, double-click on an interface in the Selected
section (or highlight the interface and click the "–"
button).
If you want more interface options, you must configure
additional WiFi, Ethernet ports, and VLAN interfaces
separately. See the Local Network Interfaces section
below (on this same administration page: Network
Settings → WiFi / Local Networks).
© 2013 CRADLEPOINT, INC.
PLEASE VISIT
HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/
FOR MORE HELP AND RESOURCES
PAGE 105
Advertisement
Table of Contents
