Table of Contents
Advertisement
MBR1400 | USER MANUAL – Firmware version 4.4
CRADLEPOINT
GSM Technology
ARC MBR1400LP
(Sierra Wireless MC7700)
ARC MBR1400LP2
(Sierra Wireless MC7710)
AT Config Script: Enter the AT commands to be used for carrier specific modem configuration settings. Each command
must be entered on a separate line. The command and associated response will be logged, so you should check the
system log to make sure there were no errors.
NOTE: AT Config Script should not be used unless told to do so by your modem's cellular provider or by a support technician.
AT Dial Script: This is included for legacy devices only. Most users will not use this option. Go to SIM/APN/Auth
Settings instead if you need to select a specific Access Point Name.
If you do need this option for older devices, enter the AT commands to be used in establishing a network connection.
Each command must be entered on a separate line. All command responses must include "OK" except the final command
response, which must include "CONNECT".
Example:
AT
ATDT*99***2#
© 2013 CRADLEPOINT, INC.
Auto
Auto 3G
(<= 3G)
✔
✔
✔
✔
PLEASE VISIT
HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/
Force 4G
Force 3G
(module auto selects)
LTE
HSPA+
(4G/3.5G)
✔
✔
✔
✔
FOR MORE HELP AND RESOURCES
Force 2G
(module auto selects)
HSPA
EDGE
GPRS
(3G)
(2.75G)
(2.5G)
✔
✔
✔
✔
✔
✔
PAGE 150
Advertisement
Table of Contents
