Table of Contents
Advertisement
MBR1400 | USER MANUAL – Firmware version 4.4
CRADLEPOINT
SMTP Mail Server
8.2.1
Since the MBR1400 does not have its own email server, to receive alerts you must enable an SMTP server. This is
possible through most email services (Gmail, Yahoo, etc.)
Each SMTP server will have different specifications for setup, so you have to look those up separately. The following is an
example using Gmail:
Server Address: smtp.gmail.com
Server Port: 587 (for TLS, or
Transport Layer Security port; the
MBR1400 does not support SSL).
Authentication Required: For
Gmail, mark this checkbox.
User Name: Your full email
address
Password: Your Gmail password
From Address: Your email
address
To Address: Your email address
Once you have filled in the information for the SMTP server, click on the "Verify SMTP Settings" button. You should
receive a test email at your account.
© 2013 CRADLEPOINT, INC.
PLEASE VISIT
HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/
FOR MORE HELP AND RESOURCES
PAGE 206
Advertisement
Table of Contents
