Cradlepoint MBR1400 Series Product Manual
  1. Manuals
  2. Brands
  3. Cradlepoint Manuals
  4. Wireless Router
  5. MBR1400 Series
  6. Product manual

Cradlepoint MBR1400 Series Product Manual

Mission-critical broadband router
Hide thumbs Also See for MBR1400 Series:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual, Product Manual

Advertisement

Table of Contents
loading

Related Manuals for Cradlepoint MBR1400 Series

Summary of Contents for Cradlepoint MBR1400 Series

  • Page 2: Manual Revisions

    MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT Preface CradlePoint reserves the right to revise this publication and to make changes in the content thereof without obligation to notify any person or organization of any revisions or changes. Manual Revisions Revision...

  • Page 3: Table Of Contents

    MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT Table of Contents 1 INTRODUCTION ..............3 5.5 I ............36 NTERNET ONNECTIONS 5.6 S ................. 47 TATISTICS 1.1 P ............. 3 ACKAGE ONTENTS 5.7 S ..............48 YSTEM 1.2 S ............3...
  • Page 4 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT 8.2 D ) ......130 EVICE LERTS DVANCED ODE ONLY 8.3 H ) ....... 132 OTSPOT ERVICES DVANCED ODE ONLY 8.4 M ) ASK YOUR ANAGED ERVICES DVANCED ODE ONLY CRADLEPOINT SALES REPRESENTATIVE FOR DETAILS ... 136 8.5 S...

  • Page 5: Introduction

    ENTERPRISE PERFORMANCE  Targeted for retail locations, branch offices, or small and medium sized businesses  Integrates seamlessly with CradlePoint‘s Business Grade modems  Load balance multiple data sources (data modems, WiFi as WAN, and wired data services)  Compatible with Cisco, Juniper, and other industry-leading network hardware providers ENHANCED WIFI ...
  • Page 6 In addition to connection options for traditional wired networking solutions like Cable, DSL, Satellite, or T1, the most powerful feature of the MBR1400 is its ability to use USB or ExpressCard Data Modems to create instant networks anywhere you receive a broadband signal.
  • Page 7 1.3.1 Captive Portal The Captive Portal solution provided by CradlePoint routers enables businesses to provide their customers with a public WiFi hotspot with access controls. The controls can be as simple as requiring acceptance of a Terms of Service agreement, while Advanced features allow administrators to control and monitor usage, require login, direct users to specific web pages, provide revenue through services fees or paid advertising, and more.

  • Page 8: Hardware Overview

    MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT 2 HARDWARE OVERVIEW © 2011 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 6...

  • Page 9: Ports , Buttons , Ands

    MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT 2.1 Ports, Buttons, and Switches © 2011 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 7...
  • Page 10 WAN (Wide Area Network—your internet source) port. Any LAN port, however, can be reconfigured as a WAN port and vice versa. Modem Ports: The MBR1400 has three USB 2.0 ports and two ExpressCard ports. WiFi Antenna Connectors: Your router comes with three 2.4 GHz WiFi antennas (Reverse SMA). 5 GHz antennas are available as an accessory.

  • Page 11: Leds

    MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT 2.2 LEDs LAN and WAN LEDs: The default settings are shown. LAN ports can be reconfigured to function as WAN ports and vice versa; the LEDs will function accordingly. © 2011 CRADLEPOINT, INC.

  • Page 12: Quick Start

    MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT 3 QUICK START 3.1 Basic Setup  Your router requires an internet source. Attach a CradlePoint Business Grade Modem, insert supported USB or ExpressCard modem/s, connect a Cable or DSL modem to the Blue Ethernet WAN port, or connect to an available WiFi source.

  • Page 13: Connect To A Computer Or Other

    SSID (service set identifier; the unique name of the local network). The SSID can be found on the bottom of the router in the form MBR1400-xxx, where ―xxx‖ is the last 3 digits of the router‘s MAC address.
  • Page 14 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT 3.2.2 Accessing the Administration Pages For most users, the MBR1400 Router can be used immediately without any special configuration changes. If you would like to change your network name or password or configure any of the...
  • Page 15 If you used the First Time Setup Wizard, you might have changed the ―WiFi Network Name‖ or the ―Security Mode‖ password. If so, you will need to reconnect to the MBR1400 network.  Find the network. Look for your new personalized network name (or the default SSID of the form ―MBR1400-xxx‖).

  • Page 16: Common Problems

    If your USB Modem has not been updated recently, it is recommended that you do so if it is having trouble connecting to the MBR1400. Insert your USB data modem into your PC and access the internet using the software provided by your cellular carrier.
  • Page 17 Then log in to the router administration pages and manually upload the firmware. Go to System Settings → System Software and click on ―Manual Firmware Upload‖.  If you are still unable to access the internet after following the above directions, contact CradlePoint Technical Support for further assistance. © 2011 CRADLEPOINT, INC.
  • Page 18 If the USB data modem LEDs are not illuminated, your modem is not connected and online. You may need to update ―Your USB or ExpressCard Modem Does Not Work With The firmware. Refer to the previous section, Router.‖ If you are still not online after updating, call CradlePoint Technical Support for further assistance. © 2011 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/...

  • Page 19: Web Interface -- Essentials

    4 WEB INTERFACE -- ESSENTIALS The MBR1400 has a Web interface for configuration and administration of all features. The interface is organized with a button for toggling between Basic Mode and Advanced Mode and 5 tabs at the top of the screen: ...
  • Page 20 The Administrator Login page will appear. Log in using your administrator password. Initially, this password can be found on the bottom of the MBR1400 unit as the Default Password. This password is also the last eight digits of the unit‘s MAC address.
  • Page 21 If you have forgotten your personalized password, you can reset the MBR1400 to factory defaults. When you reset the router, the administrator password will revert back to the Default Password. Press and hold the reset button on the router unit until the lights flash (Approximately 10-15 seconds).

  • Page 22: Ime Setup

    The First Time Setup Wizard will help you customize the name of your wireless network, change passwords to something you choose, and establish an optimal WiFi security mode. The MBR1400 comes out of the box with a unique password at WPA1/WPA2 WiFi security level.
  • Page 23 The router cannot use 802.11n modes if WEP is enabled; WiFi performance and range will be limited.  NONE (OPEN): Select this option if you do not want to activate any security features. CradlePoint recommends BEST (WPA2) WiFi security. Try this option first and switch only if you have a device that is incompatible with WPA2.
  • Page 24 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT Choose a personalized WPA PASSWORD or WEP KEY. This password will be used to connect devices to the router‘s WiFi broadcast once the security settings have been saved.  WPA Password: The WPA Password must be between 8 and 64 characters long. A combination of upper and lower case letters along with numbers and special characters is recommended to prevent hackers from gaining access to your network.
  • Page 25 Realm for your carrier. This setting ensures that the modem, when attached to the router, will properly connect to your carrier‘s wireless broadband service. The MBR1400 will default to the Sprint Realm. Select your carrier from the dropdown menu (options shown below).
  • Page 26 Please record these settings for future access. You may need this information to configure other wireless devices. NOTE: If you are currently using the MBR1400 WiFi network, reconnect your devices to the network using the new wireless network name and security password.

  • Page 27: Quick Links

    MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT 4.3 Quick Links The CradlePoint logo in the upper left-hand corner of all the administration pages is a link to the Dashboard (Status → Dashboard), which displays fundamental information about the router. The black bar across the top provides quick access to important information and controls.

  • Page 28: Basic Mode Vs . Advanced

    CRADLEPOINT 4.4 Basic Mode vs. Advanced Mode For less complex uses, the MBR1400 can be controlled within Basic Mode. Clicking on the Basic Mode button switches the complete Web interface to Advanced Mode. Advanced Mode provides several additional features. The following chart shows the complete list of features found in Basic Mode and found exclusively in Advanced Mode:...

  • Page 29: Network Settings Vs. Internet

    WAN (Wide Area Network) Examples:  If you want to change the content filtering settings for the network created by the MBR1400, go to the Network Settings tab.  If you have multiple internet sources (such as a USB modem and an Ethernet connection) for which you would like to set priority levels, go to the Internet tab.

  • Page 30: Status

    MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT 5 STATUS The Status tab displays information—no adjustments can be made from within these pages. It provides access to 8 submenu options:  Client List  Dashboard  GPS  GRE Tunnels  Internet Connections ...

  • Page 31: Client List

    MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT 5.1 Client List The Client List displays the specifications of each device connected to your router, including Wireless and Wired clients. Wireless Clients. For each device using a wireless connection to your MBR1400, the following information is displayed: Hostname, IP, MAC, Connection, and Time Online.
  • Page 32 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT poor. Signal quality can be reduced by distance, by interference from other radio-frequency sources (such as cordless telephones or neighboring wireless networks), and by obstacles between the router and the wireless device. Time Online: Simply the amount of time the device has been connected to the router.

  • Page 33: Dashboard

    After the initial setup of the router, every time you log in you will automatically be directed to this Dashboard. Also, you can click on the CradlePoint logo in the upper left-hand corner to return to the Dashboard from any page.
  • Page 34 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT Router Information: “Detailed Info‖ links to System Settings → Administration.  Product: MBR1400  Firmware: Gives the number of the current firmware version.  Build Date: Year-month-day-hours-minutes-seconds for the most recent firmware upgrade.
  • Page 35 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT Local Networks: “Detailed Info‖ links to Network Settings → WiFi / Local Networks.  Clients: The number of current clients. For each network, the following information is displayed:  Network Name: IP Address/Netmask o Route Mode: NAT (Network Address Translation), Standard (NAT-less), Hotspot, or Disabled.

  • Page 36: Gps

    MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT 5.3 GPS If GPS support is enabled and a modem capable of providing GPS coordinates is connected, this page will show a graphical view of your router's location. See the GPS section in System Settings →...

  • Page 37: Mode Only )

    MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT 5.4 GRE Tunnels (Advanced Mode only) View the status of configured GRE Tunnels. To set up or edit a GRE tunnel, go to Internet → GRE Tunnels. Included information:  Name  Status ...

  • Page 38: Internet Connections

    The Internet Connections submenu option provides a list of attached WAN devices used as the internet source for the MBR1400. Select one of these devices to see detailed information about that particular device. For each type of device, different information will be included in the Device Information section. Possible devices include: ...
  • Page 39 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT 5.5.1 Ethernet Diagnostics  Connection State (connected, idle, etc.) General Information  Protocol Ethernet Static  Product Built-in Ethernet  Type Ethernet  Port  Unique Identifier Statistics  Outgoing Bits/Second  Incoming Bits/Second ...
  • Page 40 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT WiFi as WAN 5.5.2 Diagnostics  Connection State (connected, idle, etc.) General Information  Product Wireless As WAN  Unique Identifier  Type wwan IP Information  Netmask  IP Address  Gateway ©...
  • Page 41 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT 5.5.3 GSM Modem (Nokia Datacard) Diagnostics  Signal Error Rate  Modem Firmware Version  Battery Status  Battery Level  Carrier Status  Signal Strength(dBm)  PIN Status  Connection State (connected, idle, etc.)
  • Page 42 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT  Incoming Bits/Second  Incoming Bytes  Outgoing Bytes © 2011 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 40...
  • Page 43 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT 5.5.4 EVDO Modem: (MC760 Comcast) Diagnostics  Modem Firmware Version  PRL Version  Service Display EVDO  Carrier Status  Signal Strength(dBm)  Connection Type CDMA  Connection State (connected, idle, etc.) General Information ...
  • Page 44 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT  Outgoing Bytes © 2011 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 42...
  • Page 45 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT WiMAX Modem (U300 – 4G) 5.5.5 Diagnostics For a WiMAX modem, the CINR and Signal Strength values are important as they show how strong the signal is and that has significant effects on how much data the router can download or send.
  • Page 46 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT  Type WiMAX  Port  Manufacturer Franklin Wireless Corporation Statistics  Outgoing Bits/Second  Incoming Bits/Second  Incoming Bytes  Outgoing Bytes © 2011 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES...
  • Page 47 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT 5.5.6 LTE Modem (PANTECH UML290) Diagnostics  Home Address  MN-HA SPI  Modem Firmware Version  Battery Status  MN-HA SS  Network Address Identifier (NAI)  Signal Strength(dBm)  Rev Tun ...
  • Page 48 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT General Information  Product PANTECH UML290  Protocol IP DHCP  Unique Identifier  ESN/IMEI  Model UML290VW  Type modem  Port  Manufacturer Pantech, Incorporated IP Information  Netmask  IP Address ...

  • Page 49: Statistics

     LAN, or Local Area Network, is the network you have created through the MBR1400.  WAN, or Wide Area Network, is the internet source the MBR1400 is using to create a new LAN. Possible WAN sources include: Ethernet, WiFi, USB modems, and ExpressCard modems.

  • Page 50: System Logs

    MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT 5.7 System Logs The router automatically logs (records) events of possible interest in its internal memory. If there is not enough internal memory for all events, logs of older events are deleted, but logs of the latest events are retained.

  • Page 51: Vpn Tunnels

    MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT 5.8 VPN Tunnels (Advanced Mode only) View the status of configured VPN tunnels. To set up or edit a VPN tunnel, go to Internet → VPN Tunnels. Included information:  Name  Connections ...

  • Page 52: Network Settings

    6 NETWORK SETTINGS The Network Settings tab provides access to 8 submenu options for administering the following functions/tasks. These functions are all related to controlling the LAN (Local Area Network), the network you set up with the MBR1400.  Content Filtering ...

  • Page 53: Content Filtering

    MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT 6.1 Content Filtering You have two main options for filtering content in a network created through your MBR1400. 1) Domain / URL Filter Rules: Create a list of websites that will be either disallowed (facebook.com, for...
  • Page 54 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT 6.1.1 OpenDNS OpenDNS is a service that protects you online by filtering websites. OpenDNS protects you from phishing websites and URL typos once you select a filtering level.  None: Disables Web filtering that uses OpenDNS, ...
  • Page 55 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT OpenDNS network. In order for Custom settings to work you need to login to DNS-O-MATIC using your OpenDNS credentials and "Add A Service" for the network specified above. Enable OpenDNS ISP Filter Bypass Algorithm: It is possible that your Internet Service Provider (ISP) uses the port that OpenDNS is configured to access, port 53, which will prevent OpenDNS filtering.

  • Page 56: Dhcp Server (Advanced Mode Only)

    MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT 6.2 DHCP Server (Advanced Mode only) DHCP stands for Dynamic Host Configuration Protocol. The built-in DHCP server automatically assigns IP addresses to the computers and other devices on each local area network (LAN). In this section you can view a list of assigned IP addresses and reserve IP addresses for particular devices.

  • Page 57: Dns (Advanced Mode Only)

    DNS, or Domain Name System, is a naming system that translates between domain names (www.cradlepoint.com, for example) and internet IP addresses (206.207.82.197). A DNS server acts as an internet phone book, translating between names that make sense to people and the more complex numerical identifiers. The DNS page for the MBR1400 has these distinct functions: ...
  • Page 58 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT 6.3.2 Dynamic DNS Configuration The Dynamic DNS feature allows you to host a server (Web, FTP, etc.) using a domain name that you have purchased (www.yourname.com) with your dynamically assigned IP address. Most broadband Internet Service Providers assign dynamic (changing) IP addresses.
  • Page 59 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT 6.3.3 Advanced Dynamic DNS Settings Update period (hours). (Default: 576) The time between periodic updates to the Dynamic DNS, if your dynamic IP address has not changed. The timeout period is entered in hours so valid values are from 1 to 8760.

  • Page 60: Firewall (Advanced Mode Only)

    MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT 6.4 Firewall (Advanced Mode only) The router automatically provides a firewall. Unless you configure the router to the contrary, the router does not respond to unsolicited incoming requests on any port, thereby making your LAN invisible to cyber attackers.
  • Page 61 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT Add New Port Forwarding Rule: page 2  Use Port Range: Changes the selection options to allow you to input a range of ports (if desired).  Internet Port(s): The port number(s) as you want it defined on the internet.
  • Page 62 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT 6.4.2 IP Filter Rules An "Incoming" IP filter rule restricts remote access to computers on your local network. "Outgoing" filter rules prevent computers on your local network from initiating communication to the address range specified in the rule.
  • Page 63 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT  Start Port: 80  End Port: 80  Network Address: 172.22.24.160 (Johnny‘s IP address)  Subnet Mask: 255.255.255.255 (This subnet mask restricts the rule to one single address). © 2011 CRADLEPOINT, INC.
  • Page 64 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT 6.4.3 DMZ (DeMilitarized Zone) A DMZ host is effectively not firewalled in the sense that any computer on the internet may attempt to remotely access network services at the DMZ IP address. Typical uses involve running a public Web server or sharing files.

  • Page 65: Ilter

    MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT 6.5 MAC Filter The MAC Filter allows you to create a list of devices that have either exclusive access (whitelist) or no access (blacklist) to your wireless LAN. Enabled: Click to allow MAC Filter options.

  • Page 66: Routing (Advanced Mode Only)

    MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT 6.6 Routing (Advanced Mode only) Add a new static route to the IP routing table or edit/remove an existing route. Static routes are unnecessary for most users. They are typically only used in networks with more than one layer, such as when there is a network within a network so that packet destinations are hidden behind an additional router.

  • Page 67: Wifi / Local Networks

    MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT 6.7 WiFi / Local Networks This section is used to configure the settings for wireless networks created by your router. Note that changes made in this section may also need to be duplicated on wireless devices that you want to connect to your wireless network.
  • Page 68 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT 6.7.1 Local IP Networks Local IP Networks displays the following information for each network:  Network Name  IP address/Netmask  DHCP Server (Enabled/Disabled)  Routing Mode (NAT, Standard, Hotspot, Disabled)  Access Control (Admin Access, UPnP Gateway, LAN Isolation) ...
  • Page 69 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT 6.7.2 Local Network Editor The Local Network Editor contains the following tabs: IP Settings, Interfaces, Access Control, and DHCP Server. IP Settings: Name: This primarily helps to identify this network during other administration tasks.
  • Page 70 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT  NAT: Network Address Translation hides private IP addresses behind the router's IP address. This is the simplest and most common choice for users, because NAT does the translation work for you.  Standard: NAT-less routing. If you select Standard, you must separately configure your IP addresses so that they will be publically accessible.
  • Page 71 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT Access Control: Tune the access control settings of this network to match the intended use. Simply select or deselect any of the following:  LAN Isolation: When checked, this network will NOT be allowed to communicate with other local networks.
  • Page 72 (default: 72 to 200, as in 192.168.0.72 to 192.168.0.200). Example: The MBR1400 uses an IP address of 192.168.0.1 for its primary network by default. A computer designated as a Web server has a static IP address of 192.168.0.3. Another computer is designated as an FTP server with a static IP address of 192.168.0.4.
  • Page 73  Ethernet Port Configuration  VLAN Interfaces Wireless (WiFi) Network Settings The MBR1400 can broadcast as many as four SSIDs (service set identifiers — the names for WiFi networks). One primary WiFi network is enabled by default, while you may have enabled a second guest network when using the First Time Setup Wizard.
  • Page 74 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT Wireless Network Editor WiFi Name (SSID): When you are browsing for available wireless networks, this is the name that will be broadcast from this router for the selected network. This name is referred to as the SSID (service set identifier). For security purposes, CradlePoint highly recommends that you change this from the pre-configured name.
  • Page 75 NOTE: If you don‘t know whether you should choose Personal or Enterprise, assume Personal since you need to know RADIUS authentication for Enterprise. In order to protect your network from hackers and unauthorized users, CradlePoint highly recommends WPA2/AES for security if your attached devices can support it. WEP and WPA/TKIP are obsolete and have been replaced by WPA/AES.
  • Page 76 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT NOTE: If you select one of the security modes and are unable to connect to the router afterwards, you can use the reset buttons to reset the router to its factory default state and try a different security mode instead.
  • Page 77 MBR1400.  Local Network (LAN) is for connecting a computer or similar device directly to the router with an Ethernet cable. Link Speed: Default setting is Auto. The Auto setting is preferred in most cases.
  • Page 78 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT Ethernet Port Group Editor A Port Group represents a logical grouping of Ethernet ports. Any computers physically connected to ports in a group will be allowed to freely communicate with each other. For example, if you leave all four orange ports set...
  • Page 79 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT VLAN Interfaces A virtual local area network, or VLAN, functions as any other physical LAN, but it enables computers and other devices to be grouped together even if they are not physically attached to the same network switch.
  • Page 80 LANs under the WiFi Settings heading. WiFi band: Select the range of frequencies the router will use. The MBR1400 can operate in either the 2.4 GHz or the 5.0 GHz ranges. (Default: 2.4 GHz. The included WiFi antennas are 2.4 GHz. 5 GHz antennas are available as an accessory.)
  • Page 81 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT Channel: (Shows if Random Channel is deselected.) The WiFi channel corresponds to a frequency the router uses to communicate with other devices. For 2.4 GHz, the range is 1 to 11, and 1, 6, and 11 do not overlap each other. If a WiMAX modem is attached, a higher number channel will increase the chance the router's WiFi and modem's WiMAX radios will conflict with each other, which may result in lower throughput.
  • Page 82 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT Client Timeout: If the access point is not able to communicate with the client it will disconnect it after this timeout (in seconds). TX Power: Normally the wireless transmitter operates at 100% power. In some circumstances, however, there might be a need to isolate specific frequencies to a smaller area.
  • Page 83 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT Wireless Mode: Select the WiFi clients the router will be compatible with. Greater compatibility is a tradeoff with better performance. For greatest compatibility with all WiFi devices, select "802.11 a/b/g/n". For best performance, connect with only other 802.11n-compatible devices and select "802.11 n."...
  • Page 84 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT RADIUS Retry: (Default: 60 seconds) When using an Enterprise security mode, if a RADIUS query fails to receive a response from the server it will delay by this interval (in seconds) before attempting another query. This helps protect the network from floods of authentication requests if the RADIUS server is temporarily unreachable.

  • Page 85: Wipipe Qos (Advanced Mode Only)

    MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT 6.8 WiPipe QoS (Advanced Mode only) When WiPipe QoS (Quality of Service/Traffic Shaping) is enabled, the router will control the flow of internet traffic according to the user- defined rules. In other words, Traffic Shaping improves performance by allowing the user to prioritize applications.
  • Page 86 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT automatic classification will be adequate, and specific Traffic Shaping Rules will not be required. Traffic Shaping supports overlap between rules, where more than one rule can match for a specific message flow. If more than one rule matches, the rule with the highest priority will be used.
  • Page 87 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT The second page allows you to designate the computer(s) on the local network for which you want to adjust traffic priority. NOTE: Leaving a field empty will match any IP address and/or any port number.
  • Page 88 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT The third and last page allows you to designate the network or server on the internet for which you want to shape traffic. NOTE: Leaving a field empty will match any IP address and/or any port number.

  • Page 89: Internet

    MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT 7 INTERNET The Internet tab provides access to 8 submenu items for managing a variety of internet connection options.  Connection Manager  Data Usage  Ethernet Settings  GRE Tunnels  Load Balance ...

  • Page 90: Connection Manager

    MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT 7.1 Connection Manager The router can establish an uplink via the Ethernet WAN port, WiFi as WAN, or modems plugged into a modem port. If the primary WAN connection fails the router will automatically attempt to bring up a new link on another device. This feature is called failover.
  • Page 91 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT 7.1.2 Failure Check (Advanced Mode Only) If this is enabled, the router will check that the highest priority active WAN interface can get to the internet even if the WAN connection is not actively being used.
  • Page 92 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT 7.1.3 Failback Configuration (Advanced Mode Only) This is used to configure failback, which is the ability to go back to a higher priority WAN interface if it regains connection to its network. Usage: Fail back based on the amount of data passed over time.

  • Page 93: Data Usage (Advanced Mode Only)

    Agreement shown to the right. The purpose of this agreement is to ensure that you understand that the data numbers for the MBR1400 may not perfectly match those of your carrier: CradlePoint cannot be held responsible. You must accept the agreement by clicking Yes in order to begin creating data usage rules.
  • Page 94 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT 7.2.1 Data Usage Rules The Date Usage Rule display shows basic information for each rule you have created (including rules created with a template). The following information is displayed:  Rule Name  Enabled: True/False ...
  • Page 95 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT Usage Rule Configuration – page 2 Cycle Type: How often the rule will reset. The data usage amount will be reset at the end of each cycle. Select the length of a cycle from a dropdown menu with the following choices: ...
  • Page 96 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT Template Configuration 7.2.2 Templates allow you to control multiple WAN devices with the same rule. Each WAN device that matches a template will automatically have its own rule created. For example, you can set a template rule for all mobile data modems that causes your router to send an alert after 1000 MB of usage in a month.
  • Page 97 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT Historical Data 7.2.3 Historical Data shows a graph of data usage for each attached WAN source that has an assigned Data Usage Rule. The graph shows the usage trend for one day. Click Add Usage to manually input additional usage for an attached data source.

  • Page 98: Ethernet Manager

    MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT 7.3 Ethernet Manager Ethernet Manager provides controls for your router‘s Ethernet WAN ports. There are five total ports: one blue port and four numbered orange ports. By default, only the blue port is set as a WAN port, but any of the orange ports can be reconfigured as WAN ports in Network Settings →...
  • Page 99 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT Static (Manual):  IP Address  Subnet Mask  Gateway IP  Primary DNS Server  Secondary DNS Server PPPoE:  Username  Password  Password Confirm  Service  Auth Type: None, PAP, CHAP ©...

  • Page 100: Gre Tunnels (Advanced Mode Only)

    Generic Routing Encapsulation (GRE) tunnels can be used to create a connection between two private networks. The MBR1400 is enabled for either GRE or VPN tunnels. GRE tunnels are simpler to configure and more flexible for different kinds of packet exchanges, but VPN tunnels are much more secure.
  • Page 101 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT Page 1: General Tunnel Name: Choose a name that is meaningful to you. Local Network: This is the local side of the ―Glue Network,‖ a network created by the administrator to form the tunnel. The user creates the IP address inputted here.
  • Page 102 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT Keep Alive: This feature monitors the status of a tunnel. This will more accurately determine if the tunnel is alive or not. Choose the length of time in seconds of the Period for each check (Default: 10 seconds. Range: 2 – 3600 seconds) and the number of Retry attempts (Default: 3.

  • Page 103: Load Balance (Advanced Mode Only)

    MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT 7.5 Load Balance (Advanced Mode only) When enabled in Connection Manager (Internet → Connection Manager), the router will use multiple WAN interfaces to increase the data transfer throughput by using any connected WAN interface consecutively. Connections are load balanced between interfaces based on a dynamic measurement of bandwidth available.

  • Page 104: Modem Settings

    MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT 7.6 Modem Settings This section shows all attached modems and allows you to change settings. If you have a 3G/4G dual-mode modem it will show both modems using the same USB port. Update/Activate a Modem 7.6.1...
  • Page 105 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT The modem supports Update/Activate methods: A message will display showing options for each supported method:  Modem Activation / Update: Activate, Reactivate, or Upgrade Configuration.  Preferred Roaming List (PRL) Update  Firmware Update Management Object (FUMO) Click the appropriate icon to start the process.
  • Page 106 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT Modem Connection Settings (Advanced Mode Only) 7.6.2 This section changes settings that affect how all modems attempt to connect to the service provider's network. Connection Mode: Typically modem connections are not set to remain on. The router allows you to set the type of reconnection mode.
  • Page 107 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT Configuration Rule: First page. Create a name for your rule and the condition for which the rule applies. Rule Name: Create a name meaningful to you. Select each of the following to create a condition for your rule.
  • Page 108 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT Configuration Rule: WiMAX Settings WiMAX Realm: Select from the following dropdown options:  Clear – clearwire-wmx.net  Rover – rover-wmx.net  Sprint 3G/4G – sprintpcs.com  Xohm –xohm.com  BridgeMAXX – bridgeMAXX.com  Time Warner Cable – mobile.rr.com ...
  • Page 109 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT Configuration Rule: Modem Settings AT Dial Script: Enter the AT commands to be used in establishing a network connection. Each command must be entered on a separate line. All command responses must include ―OK‖ except the final command response, which must include ―CONNECT‖.
  • Page 110 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT Configuration Rule: SIM/APN Settings SIM PIN: PIN number for a GSM modem with a locked SIM. Access Point Name (APN): Some wireless carriers provide multiple Access Point Names that a modem can connect to.

  • Page 111: Unnels (Advanced Mode Only )

    The MBR1400 uses IPsec (Internet Protocol security) to authenticate and encrypt packets exchanged across the tunnel. To set up a VPN tunnel with the MBR1400 on one end, there must be another device (usually a router) that also supports IPsec on the other end.
  • Page 112 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT Page 1: General 7.7.1 Tunnel Name: Choose a name meaningful to you. Local Identity: This can be left blank for most users. If left blank it will default to the IP address of the WAN connection. Currently we only support identifiers in the form of an IP address, a user fully qualified domain name (user@mydomain.com) or just a...
  • Page 113 CRADLEPOINT Tunnel Enabled: Enabled or Disabled. MBR1200 Quick Connect: VPN tunnels in the MBR1400 have more choices than they do in the MBR1200, so it is more complex to configure. Check this box to simplify setup by streamlining your options.
  • Page 114 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT 7.7.3 Page 3: IKE Phase 1 IKE security has two phases, Phase 1 and Phase 2. You have the ability to distinctly configure each phase, but the default settings will be sufficient for most users.
  • Page 115 In Phase 1, only one DH group can be selected while using Aggressive exchange mode. By default, all the algorithms (encryption, hash, and DH groups) supported by the MBR1400 are checked, which means they are allowed for any given exchange. Deselect these options to limit which algorithms will be accepted. Be sure to check that the router (or similar device) at the other end of the tunnel has matching algorithms.
  • Page 116 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT 7.7.4 Page 4: IKE Phase 2 Perfect Forward Secrecy (PFS): Enabling this feature will require IKE to generate a new set of keys in Phase 2 rather than using the same key generated in Phase 1.
  • Page 117 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT 7.7.5 Page 5: Dead Peer Detection Dead Peer Detection (DPD) defines how the router will detect when one end of the IPsec session loses connection while a policy is in use. Connection Idle Time allows you to configure how long the router will allow an IPsec session to be idle before beginning to send Dead Peer Detection (DPD) packets to the peer machine.
  • Page 118 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT Page 6: Tunnel Summary 7.7.6 The final page of the tunnel configuration interface is a summary of the tunnel specifications. This is especially helpful for matching this information with the router (or similar device) at the other end of the tunnel.
  • Page 119 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT 7.7.7 Global VPN Settings These settings apply to all configured VPN tunnels. Changing the Global VPN Settings is rarely necessary; the default values are almost always sufficient.  IKE / ISAKMP Port: Internet Key Exchange / Internet Security Association and Key Management Protocol port.
  • Page 120 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT 7.7.8 VPN with NAT-T If one side of a planned VPN tunnel is behind a NAT (network address translation) firewall, the setup of your tunnel requires the following specifications: 1. Each side of the tunnel must use both a Local Identity and a Remote Identity. These must match the identities on the other side: The Local Identity must match the Remote Identity on the other side of the tunnel, and vice versa.

  • Page 121: W I F I As Wan Settings

    WiFi—from a hotel for example—can be used as the internet source for your own private network. When enabled in the WiFi as WAN Settings page, the MBR1400 will find possible WiFi sources that you can select and add.
  • Page 122 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT Network Name (SSID): The name that is broadcast from each access point. Network ID (BSSID): The numeric ID of the network. This parameter is required when trying to connect to a hidden network using WiFi as WAN.
  • Page 123 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT Wireless Scan Settings 7.8.3 Scan Interval: How often WiFi as WAN scans the environment for updates. (Default: 60 seconds. Range: 5-3600 seconds.) Scan While Connected: Continue to scan for WiFi as WAN profile updates when connected. Each time a scan occurs the wireless communication of the router will be temporarily interrupted.

  • Page 124: System Settings

    MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT 8 SYSTEM SETTINGS The System Settings tab has 6 submenu items that provide access to tools for broad administrative control of the MBR1400:  Administration  Device Alerts  Hotspot Services  Managed Services ...

  • Page 125: Administration

    MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT 8.1 Administration Select the Administration submenu item in order to control any of the following functions:  Web Login  Network Time Protocol  Timezone  Bounce Pages  UPnP  Remote Management ...
  • Page 126 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT 8.1.3 Timezone This is the time zone and daylight savings setting used by the router for its own clock. This can also be controlled in the First Time Setup Wizard. Daylight Savings Time: Select this checkbox if your location observes daylight savings time.
  • Page 127 SSH protocol. Use the username "admin" and the standard system password to login.  SSH Server Port: Default: 22.  Allow Remote SSH Access Technical Support Access: Only enable this option if instructed by a CradlePoint support agent. © 2011 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/...
  • Page 128 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT 8.1.7 If you have an attached device with GPS support, you can enable a graphical view of your router‘s location which will appear in Status → GPS Status. Users can configure GPS NMEA GGA format sentence reporting, available through a router- based server and/or a remote server.
  • Page 129 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT $GPGGA – Global Positioning System Fix Data 8.1.8 Name Example Data Description Sentence Identifier $GPGGA Global Positioning System Fix Data Time 170834 17:08:34 Z Latitude 4124.8963, N 41d 24.8963' N or 41d 24' 54" N Longitude 08151.6838, W 81d 51.6838' W or 81d 51' 41"...
  • Page 130 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT eg2. $--GGA,hhmmss.ss,llll.ll,a,yyyyy.yy,a,x,xx,x.x,x.x,M,x.x,M,x.x,xxxx hhmmss.ss = UTC of position llll.ll = latitude of position a = N or S yyyyy.yy = Longitude of position a = E or W x = GPS Quality indicator (0=no fix, 1=GPS fix, 2=Dif. GPS fix) xx = number of satellites in use x.x = horizontal dilution of precision...
  • Page 131 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT 13 = Age in seconds since last update from diff. reference station 14 = Diff. reference station ID# 15 = Checksum 8.1.9 Syslog Settings Enabling this option will send log messages to a specified Syslog server.

  • Page 132: Device Alerts (Advanced Mode Only)

    SMTP Mail Server 8.2.1 Since the MBR1400 does not have its own email server, to receive alerts you must enable an SMTP server. This is possible through most email services (Gmail, Yahoo, etc.) Each SMTP server will have different specifications for setup, so you have to look those up separately. The following is an example using Gmail: ©...
  • Page 133 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT  Server Address: smtp.gmail.com  Server Port: 587 (for TLS, or Transport Layer Security port; the MBR1400 does not support SSL).  Authentication Required: Gmail, mark this checkbox.  User Name: Your full email address ...

  • Page 134: Hotspot Services (Advanced Mode Only)

    Network Settings → WiFi / Local Networks. NOTE: Although any network can be a hotspot, the MBR1400 allows only one hotspot. Enable Hotspot Services: Disabled by default. Click Enabled to activate Hotspot options.
  • Page 135 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT 8.3.1 Simple Mode Settings Display: This section allows you to choose if a "Terms of Use" page will be given to the user connecting to the hotspot.  Internal Terms of Use. Fill in your own terms of use.
  • Page 136 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT 8.3.2 RADIUS/UAM Settings This section allows you to configure a RADIUS or Universal Access Method server. After the user accepts the terms, you can either let him/her continue to the URL they were trying to reach or you can force the user to go to a specified UAM Server or URL once before continuing on.
  • Page 137 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT 8.3.3 Host/Domain Name Adding Host / Domain names gives you the ability to allow access from your network to any external domain or website prior to being authenticated. For example, a hotel might allow access to its own website prior to authentication.

  • Page 138: Managed Services (Advanced Mode Only) Ask Your Cradlepoint Sales Representative For Details

    MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT 8.4 Managed Services (Advanced Mode only) ASK YOUR CRADLEPOINT SALES REPRESENTATIVE FOR DETAILS Managed Services allow you to centralize your router configuration using the WiPipe Central server. WiPipe Central services must be purchased separately.

  • Page 139: System Control

    MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT 8.5 System Control Restore to Factory Defaults: This changes all settings back to their default values. Reboot The Device: This causes the router to restart. Advanced: System Automatic Reboot and Ping Test Scheduled Reboot: This causes the router to restart at a user-determined time.

  • Page 140: System Software

    MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT 8.6 System Software Firmware Upgrade: This allows the administrator to load new firmware onto the router to add new features or fix defects. If you are happy with the operation of the router, you may not want to upgrade just because a new version is available.

  • Page 141: Glossary

    MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT 9 GLOSSARY 802.11 Alphanumeric A family of specifications for wireless local area networks Characters A-Z and 0-9. (WLANs) developed by a working group of the Institute of Antenna Electrical and Electronics Engineers (IEEE).
  • Page 142 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT Authentication Bit rate To provide credentials, like a Password, in order to verify The amount of bits that pass in given amount of time. that the person or device is really who they are claiming Bit/sec to be.
  • Page 143 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT CardBus Data-Link layer A newer version of the PC Card or PCMCIA interface. It The second layer of the OSI model. Controls the supports a 32- bit data path, DMA, and consumes less movement of data on the physical link of a network.
  • Page 144 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT Demilitarized zone Download DMZ: A single computer or group of computers that can To send a request from one computer to another and be accessed by both users on the internet as well as have the file transmitted back to the requesting computer.
  • Page 145 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT Encryption Fragmentation Converting data into cyphertext so that it cannot be easily Breaking up data into smaller pieces to make it easier to read. store. Ethernet The most widely used technology for Local Area File Transfer Protocol.
  • Page 146 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT Half-duplex IEEE Data cannot be transmitted and received at the same Institute of Electrical and Electronics Engineers. time. IGMP Hashing Internet Group Management Protocol is used to make Transforming a string of characters into a shorter string sure that computers can report their multicast group with a predefined length.
  • Page 147 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT Internet Protocol Security Java IPsec provides security at the packet processing layer of A programming language used to create programs and network communication. applets for web pages. Internet Service Provider Kbps An ISP provides access to the internet to individuals or Kilobits per second.
  • Page 148 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT LPR/LPD MPPE ―Line Printer Requestor‖/‖Line Printer Daemon‖. A Microsoft Point-to-Point Encryption is used to secure data TCP/IP protocol for transmitting streams of printer data. transmissions over PPTP connections. MAC Address A unique hardware ID assigned to every Ethernet Maximum Transmission Unit is the largest packet that adapter by the manufacturer.
  • Page 149 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT Network Interface Card routers in the network as opposed to sending the entire routing table at a regular interval, which is how RIP NIC. A card installed in a computer or built onto the functions.
  • Page 150 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT channel) but can have multiple ports (logical channels) Rendezvous each identified by a number. Apple‘s version of UPnP, which allows for devices on a network to discover each other and be connected without the need to configure any settings.
  • Page 151 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT Session key An encryption and decryption key that is generated for Secure Shell is a command line interface that allows for every communication session between two computers. secure connections to remote computers. Session layer...
  • Page 152 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT TFTP Upload Trivial File Transfer Protocol is a utility used for To send a request from one computer to another and transferring files that is simpler to use than FTP but with have a file transmitted from the requesting computer to less features.
  • Page 153 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT Wake on LAN WiFi Protected Access Allows you to power up a computer through it‘s Network An updated version of security for wireless networks that Interface Card. provides authentication as well as encryption.
  • Page 154 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT Yagi antenna A directional antenna used to concentrate wireless signals on a specific location. © 2011 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 152...

  • Page 155: Appendix

    If the purchaser wishes to upgrade or convert to another CradlePoint, Inc. product within the thirty (30) day period, purchaser may return the product and apply the full purchase price toward the purchase of the other product. Any other return will be subject to CradlePoint, Inc.‘s existing return policy.

  • Page 156: Specifications

    MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT 10.3 Specifications MODEL NAME DETAILS MBR1400 Mission-Critical Broadband Router  2.412 to 2.484 GHz WiFi Frequency Band WAN / INTERNET Operation  Compliant with IEEE 802.3 and 3u Standards 3G/4G via five modem ports (3 USB 2.0, 2 ExpressCard);...
  • Page 157 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT  Keying - automatic using IKE 1.0 or manual  Authentication Method: Pre-Shared Key © 2011 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 155...
  • Page 158 MBR1400| USER MANUAL Firmware ver. 3.3.0 CRADLEPOINT http://www.cradlepoint.com/ Copyright © 2011 by CradlePoint, Inc. All rights reserved. © 2011 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 156...

Table of Contents