IBM 200 GB LTO-2 User Manual page 77

14. Rotate the loader motor gear counterclockwise until you feel resistance and
the cartridge rises and ejects (see Figure 24).
Figure 24. Rotating the loader motor gear until the cartridge ejects
15. Remove the tape cartridge. If the leader pin is not seated correctly in the
cartridge, see "Repositioning or reattaching a leader pin" on page 20.
16. Copy the data on the stuck tape cartridge to another cartridge. If appropriate,
return the stuck tape cartridge for analysis in its original packaging or in the
packaging from its replacement.
17. Reassemble the tape drive by reversing the preceding steps.
18. To ensure that the drive operates properly, refer to page 36 and select
Function Code 1 - Run Tape Drive Diagnostics.
Chapter 6. Servicing the tape drive
67