Repositioning Or Reattaching A Leader Pin; Repositioning A Leader Pin - IBM 200 GB LTO-2 User Manual

Repositioning or reattaching a leader pin

If the leader pin in your cartridge becomes dislodged from its pin-retaining spring
clips or detaches from the tape, you must use the IBM Leader Pin Reattachment
Kit (part number 08L9129) to reposition or reattach it. (Do not reattach the pin if
you must remove more than 7 meters (23 feet) of leader tape.) The sections that
follow describe each procedure.

Repositioning a leader pin

A leader pin that is improperly seated inside a cartridge can interfere with the
operation of the drive. Figure 8 shows a leader pin in the incorrect 1 and correct
To place the leader pin in its proper position, you will need the following tools:
v Plastic or blunt-end tweezers
v Cartridge manual rewind tool (from Leader Pin Reattachment Kit, part number
Figure 8. Leader pin in the incorrect and correct positions. The cartridge door is open and the
leader pin is visible inside the cartridge.
20
IBM 200/400GB LTO-2 Tape Drive: User's Guide
Attention: Use a repaired tape cartridge only to recover data
and move it to another cartridge. Continued use of a repaired
cartridge may void the warranties of the drive and the cartridge.
2 positions.
08L9129)