IBM 200 GB LTO-2 User Manual page 58

Note: The codes on the single-character display have different meanings,
Table 7. Methods of receiving errors and messages for the IBM TotalStorage LTO Ultrium 2 Tape Drive
If the error or message was
presented by....
The enclosure's display (if the tape
drive is enclosed in a library or
autoloader)
The tape drive's single-character
display and the status light flashes
amber
The tape drive's single-character
display and the status light is solid
amber
SCSI log sense data (such as
TapeAlert flags) or SCSI drive sense
data
Drive sense data sent to a library (if
the tape drive is enclosed in a
library)
The tape drive's error log
48
IBM 200/400GB LTO-2 Tape Drive: User's Guide
depending on whether they display during normal operations or while the
drive is in maintenance mode. Codes that occur during normal operations
are defined in Table 8 on page 49. Codes that occur while in maintenance
mode are defined in Table 5 on page 36.
Do this....
Refer to the documentation for the enclosure.
See Table 8 on page 49. To determine the meaning of status light activity, see
"Status light" on page 32.
See Table 5 on page 36. To determine the meaning of status light activity, see
"Status light" on page 32.
See Appendix B, "TapeAlert flags", on page 71, Table 8 on page 49.
Refer to your library's documentation, then see Table 8 on page 49.
See Table 8 on page 49.