IBM 200 GB LTO-2 User Manual page 36

13. Use your fingers to remove the leader pin from the cavity 3 in the leader
14. Use the cartridge manual rewind tool to wind the tape back into the cartridge
15. Remove the rewind tool.
16. Remove the leader pin attach tool by lifting its end up and away from the
26
IBM 200/400GB LTO-2 Tape Drive: User's Guide
pin attach tool.
(wind the tape clockwise). Ensure that the leader pin is latched by the
pin-retaining spring clips on each end of the leader pin.
cartridge.
Attention: Use a repaired tape cartridge only to recover data
and move it to another cartridge. Continued use of a repaired
cartridge may void the warranties of the drive and the cartridge.