Sendingmessages To Lcd Speakerphones; Station-To-Station Messaging - Comdial R DSU User Manual

GCA70–248
8.2 Sending Messages To LCD Speakerphones
NOTE: You can set system-supplied messages to be displayed by
calling an LCD speakerphone.
•
To turn LCD messaging on,
1. Press INTERCOM.
2. Dial 0 2.
3. Choose message code number (0–9).
4. Press SPEAKER.
8.3

Station-To-Station Messaging

•
To activate station-to-station messaging (station must have BLF
appearance at called station),
1. Make intercom call and hear ring-back tone.
2. Dial 7; your station's BLF light turns on at called station.
3. Hang up handset.
•
To cancel station-to-station messaging,
1. Press INTERCOM and dial # 7.
2. Dial extension number of station where you left the call-back
indication.
3. Press SPEAKER.
Programming Your Telephone
Non-LCD Station User's Guide 8 – 3