Comdial 7OlOS System User's Manual page 68

Prime line: A line designated to a particular telephone and
automatically selected when the handset is lifted.
Programmable buttons: Each telephone or station has but-
tons that can be user-programmed for autodialing numbers or
feature codes, or other special purpose dialing requirements.
Pulse/Tone switching: Changing from pulse/rotary dial sig-
nals to tone/DTMF signals.
R
Response messaging: Responding non-verbally to a calling sta-
tion by pressing a programmed button that sends a message to
the calling station's display.
Ringing line preference: An automatic connection to any out-
side line ringing at the station when the station handset is taken
off-hook.
S
Saved number redialing: Saving a last manually dialed num-
ber for later autodialing.
Secure off-hook voice announce: A private announcement
that can be made to a busy party which they hear through the
receiver of their handset.
Speed dialing: Autodialing using the keypad buttons. Speed
dialing can be station calls (personal and accessed by only one
specific user) or system calls (numbers used and accessed by
anyone in the system).
T
TAP: Depending on your system's programming, this button
gives you a fresh dial tone or activates a hookflash.
Tone call: A ringing intercom call.
TYans/Conf: A fixed feature button that allows you to transfer
outside calls and set up conference calls.
V
Voice call: A verbal intercom call.
Voice announce blocking: A telephone can be set to block
voice calls sent to it over the speaker.
Z
Zone paging: Paging through the intercoms of some stations
or departments in the system.
61