Mail Menu - Epson EB-4955WU User Manual

List of Functions
Submenu
IP Settings DHCP: You can set whether or not (On/Off) to use DHCP
If this is set to On, you cannot set any more addresses.
IP Address: You can input the IP address
projector.
You can enter a number from 0 to 255 in each field of the address.
However, the following IP addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
Subnet Mask: You can input the Subnet Mask
projector. You can enter a number from 0 to 255 in each field of
the address. However, the following subnet masks cannot be
used.
0.0.0.0, 255.255.255.255
Gateway Address: You can input the IP address for the gateway
for the projector.
You can enter a number from 0 to 255 in each field of the address.
However, the following Gateway addresses
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
To prevent the IP address from being displayed on the LAN
IP Address Dis-
Standby screen, set this to Off.
play

Mail menu

When this is set, you receive an email notification if a problem or warning
occurs in the projector.
"Reading Error Notification Mail"
s
Function
g
g
assigned to the
g
for the
g
cannot be used.
p.128
.
Submenu
Mail Notification Set to On to send an email to the preset addresses when a problem
or warning occurs with a projector.
You can input the IP address
SMTP Server
projector.
You can enter a number from 0 to 255 in each field of the address.
However, the following IP addresses cannot be used.
127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from
0 to 255)
Port Number You can input the port number for the SMTP server. The default
value is 25. You can input numbers between 1 to 65535.
88
Function
g
for the SMTP server for the