Epson EB-4955WU User Manual page 13

Part Names and Functions
Name
A
Turns the projector on.
[ ] button
B
[t] button Turns the projector off.
C
Change input buttons Changes to images from each input port.
s "Switching to the Target Image by Remote Control"
p.39
The [HDBaseT] button and the [SDI] button are not
available for this projector.
D
If pressed while projecting analog RGB signals from the
[Auto] button
Computer port or the BNC port, you can automatically
optimize Tracking, Sync., and Position.
E
[Aspect] button Each time the button is pressed, the aspect mode changes.
s "Changing the Aspect Ratio of the Projected Image "
p.45
F
[Test Pattern] button Displays a test pattern.
s "Displaying a Test Pattern"
G
Images are paused or unpaused.
[Freeze] button
s "Freezing the Image (Freeze)"
H
Displays and closes the Configuration menu.
[Menu] button
s "Using the Configuration Menu"
• When the Configuration menu or the Help screen is
I
[ ][ ][ ][ ]
displayed, pressing these buttons selects menu items
buttons
and setting values.
s "Using the Configuration Menu"
• When using the optional wireless mouse receiver,
pressing these buttons moves the pointer.
s "Optional Accessories"
Function
p.21
p.57
p.71
p.71
p.137
Name
• When the Configuration menu or the Help screen is
J
[ ] button
displayed, it accepts and enters the current selection and
moves to the next level.
s "Using the Configuration Menu"
• Acts as a mouse's left button when using the optional
wireless mouse receiver.
s "Optional Accessories"
K
Each time the button is pressed, the image changes
[Split] button
between projecting two images simultaneously by
splitting the projected screen, or projecting one image as
normal.
s "Projecting Two Images Simultaneously (Split Screen)
" p.53
L
Moves to the previous or next image file when projecting
[Page] buttons
images from a computer connected via a network.
[[][]]
M
[a] Decreases the volume.
[Volume] buttons
[a][b]
[b] Increases the volume.
s "Adjusting the Volume"
N
[User1] button Select any frequently used item from the eight available
[User2] button Configuration menu items, and assign it to one of these
buttons. By pressing the button, the assigned menu item
[User3] button
selection/adjustment screen is displayed, allowing you to
make one-touch settings/adjustments.
s "Settings Menu"
• Enter the Password.
O
Numeric buttons
s "Setting Password Protection"
• Use this button to enter numbers in Network settings
from the Configuration menu.
P
Hold down this button and press the numeric buttons to
[ID] button
select the ID for the projector you want to operate using
the remote control.
s "ID Settings"
13
Function
p.71
p.137
p.39
p.77
p.65
p.25