Network Menu - Epson EB-4955WU User Manual

List of Functions
Submenu
A/V Settings A/V Output: (This item can be set only if Standby Mode is
set to Communication On) Set this to Always On when the
projector is in standby status and you want to output audio
and images to an external device.
Monitor Out: Select the image source output to an external
monitor when the projector is in standby status. When set
to Auto, analog RGB signals from the Computer port or the
BNC port are output depending on which source was
selected when the projector was turned off.
Audio Settings: Perform the following audio related
settings.
• Audio Output: Select the audio to be output when
projecting images from the Computer port, BNC port,
S-Video port or Video port. When set to Auto, audio is
output from the audio input port corresponding to each
image input port.
s "Connecting Equipment"
• DisplayPort Audio Output: Select the audio source when
projecting images from the DisplayPort. If you select
DisplayPort, audio for the image is output as it is. If you
select Audio3, audio is output from the Audio3 port.
• HDMI Audio Output: Select the audio source when
projecting images from the HDMI port. If you select
HDMI, audio for the image is output as it is.
If you select Audio3, audio is output from the Audio3
port.
Standby Mode If you set Communication On, you can perform the
following operations even if the projector is in standby
mode.
• Monitor and control the projector over a network.
• Output audio and images to an external device. (Only
when A/V Output is set to Always On.)
Function
p.28
Submenu
Multi-Projection Multi-screen: You can adjust the tint and brightness of each
projected image.
s "Correcting"
Projector ID: Set the ID from 1 to 9.Off indicates that no
ID is set.
s "ID Settings"
Schedule Set- You can set the projector's schedule so that it performs a
tings specific operation at a pre-scheduled time.
s "Scheduling Function"
You can set the language for messages and menus.
Language
Reset You can reset all adjustment values for the Extended menu
to their default settings. However, the following items are
not reset.
Screen Type, Screen Position, Projection, High Altitude
Mode, Remote Control Type, Inv Direction Button,
Startup Source Search, A/V Mute Release, A/V Output,
Monitor Out, Standby Mode, Multi-screen, Projector ID,
and Language
See the following to return all menu items to their default
settings.
s "Reset Menu"
* When User's Logo Protection is set to On in Password Protection, settings
related to user's logo cannot be changed. You can make changes after setting
User's Logo Protection to Off.
s "Managing Users (Password Protection)"

Network Menu

When Network Protection is set to On in Password Protection, a message
is displayed and the network settings cannot be changed. Set Network
Protection to Off and then configure the network.
Function
p.50
p.25
p.62
p.92
p.65
81