Table of Contents
Advertisement
Projector Network Settings - Network Menu
Setting
Options
IP Address Display On
Off
Network Menu - Mail Notification Menu
Settings on the Mail Notification menu let you receive an email notification if
a problem or warning occurs in the projector.
Setting
Options
Mail Notification
On
Off
SMTP Server
Various IP
addresses
Authentication
Open
Auth
SSL
TLS
Port Number
1 to 65535 (default
is 25)
User Name
Up to 64
alphanumeric
characters
Password
Up to 64
alphanumeric
characters
Description
Set to On to display the IP address on the
network information screen and Home
screen.
Description
Set to On to send an email to the preset
addresses when a problem or warning
occurs with a projector.
Enter the IP address for the projector's
SMTP server using 0 to 255 for each
address field.
Do not use these addresses: 127.x.x.x,
192.0.2.x or 224.0.0.0 through
255.255.255.255 (where x is a number
from 0 to 255).
Select the authentication type of the
SMTP server.
Enter a number for the SMTP server Port
Number.
Enter a user name for the SMTP server.
Enter a password for authentication on
the SMTP server.
Setting
Options
From
Up to 64
alphanumeric
Address 1 Setting
characters
Address 2 Setting
(do not use " ( ) , : ;
Address 3 Setting
< > [ \] spaces)
Network Menu - Projector Control Menu
Settings on the Projector Control menu let you select settings for controlling
the projector over a network.
Setting
Options
PJLink
On
Off
PJLink Password
Up to 32
alphanumeric
characters
(do not use spaces
and any symbols
other than @)
Notified IP Address Various IP
addresses
SNMP
On
Off
185
Description
Enter the email address of the sender.
Enter the e-mail address, and select the
alerts you want to receive.
Description
Set to On to enable the PJLink
notification function.
Enter a password for using the PJLink
protocol for projector control.
Enter the IP address to receive the
projector's operating status when the
PJLink notification function is enabled.
Enter the addresses using 0 to 255 for
each address field.
Do not use these addresses: 127.x.x.x or
224.0.0.0 through 255.255.255.255
(where x is a number from 0 to 255).
Set to On to monitor the projector using
SNMP. To monitor the projector, you
need to install the SNMP manager
program on your computer. SNMP
should be managed by a network
administrator.
Advertisement
Table of Contents
