Epson EB-4955WU User Manual page 86

List of Functions
Submenu
Security You can select a type of security.
• When Quick is selected
No: Security is not set.
WPA2-PSK (only when SSID Auto Setting is set to On):
Communication is performed using WPA2 security. Uses
AES method for encryption. When establishing a
connection from a computer to the projector, enter the
value set in the passphrase.
• When Advanced is selected
No: Security is not set.
WEP: Connects using an encryption key (WEP key).
Communication is not possible if the encryption key
between the access point and the projector does not
match.
WPA-PSK/WPA2-PSK: Connects in WPA personal mode.
Encryption method is selected automatically according to
the access point settings. Set a passphrase which is the
same for the access point.
Function
Submenu
WEP Encryption Set the encryption method for WEP encryption.
128Bit: Uses 128 (104) bit encryption.
64Bit: Uses 64 (40) bit encryption.
Format Set the format for the WEP encryption key.
ASCII: Input as text.
HEX: Input in hexadecimal.
Select the WEP encryption ID key.
Key ID
Enter the key to be used for WEP encryption. Enter the key in
Encryption Key
single-byte characters according to instructions from the
1/Encryption Key
2/Encryption Key administrator for the network the projector is going to join. The
3/Encryption Key type of supported characters and the number of characters
4 changes depending on the WEP Encryption and Format
settings.
For 128Bit - ASCII: 13 single-byte alphanumeric characters
For 64Bit - ASCII: 5 single-byte alphanumeric characters
For 128Bit - HEX: 26 characters using 0 to 9 and A to F
For 64Bit - HEX: 10 characters using 0 to 9 and A to F
Sets the WEP authentication type.
Authentication
Type
Open: Uses an open system authentication.
Shared: Uses a shared key authentication.
86
Function