Setting The Time - Epson EB-4955WU User Manual

Installing the Projector
b
While holding the [ID] button, press a number button to select a
number to match the ID of the projector you want to operate.
"Checking the Projector ID"
s
Remote control
Once this setting has been made, the projector that can be operated by the
remote control is limited.
a
The remote control ID setting is saved in the remote control. Even if
the remote control batteries are removed to replace them and so on,
the stored ID setting is retained. However, if the batteries are left out
for a long time, it is reset to the default value (ID0).

Setting the Time

You can set the time for the projector. The set time is used by the schedule
function.
p.25
"Scheduling Function" p.62
s
a
• When you turn on the projector for the first time, the message "Do
you want to set the time?" is displayed. When you select Yes, the
screen from step 4 is displayed.
• When Time/Schedule Protection is set to On in Password
Protection, settings related to the date and time cannot be changed.
You can make changes after setting Time/Schedule Protection to
Off.
s "Managing Users (Password Protection)"
a
Press the [Menu] button while projecting.
"Using the Configuration Menu"
s
b
Select Operation from Extended.
c
Select Date & Time, and then press the [
d
Make settings for the date and time.
Use the soft keyboard to enter the date and time.
"Soft keyboard operations"
s
p.65
p.71
] button.
p.83
26