Esc/Vp21 Commands; Command List - Epson EB-4955WU User Manual

Monitoring and Controlling
A
[ ] button
Turns the projector on.
B
Change input buttons
s "Switching to the Target Image by Remote Control"
C
[Freeze] button
s "Freezing the Image (Freeze)"
D
[A/V Mute] button
s "Hiding the Image and Sound Temporarily (A/V Mute)"
E
[Page] buttons
s "Remote Control"
F
[Volume] buttons
G
[Source Search] button
s "Automatically Detect Input Signals and Change the Projected Image
(Source Search)" p.38
H
[t] button
Turns the projector off.
p.39
p.57
p.12

ESC/VP21 Commands

You can control the projector from an external device using ESC/VP21.

Command list

When the power ON command is transmitted to the projector, the power
turns on and it enters warm-up mode. When the projector's power has
turned on, a colon ":" (3Ah) is returned.
When a command is input, the projector executes the command and
returns a ":", and then accepts the next command.
If the command being processed terminates abnormally, an error message is
output and a ":" is returned.
The main contents are listed below.
Power ON/OFF
Signal selection
p.56
Item
On
Off
Computer Auto
RGB
Component
BNC Auto
RGB
Component
HDMI
Video
S-Video
LAN
DisplayPort
130
Command
PWR ON
PWR OFF
SOURCE 1F
SOURCE 11
SOURCE 14
SOURCE BF
SOURCE B1
SOURCE B4
SOURCE 30
SOURCE 41
SOURCE 42
SOURCE 53
SOURCE 70