Whiteboard Settings Menu - Mail Menu - Epson EB-145OUI User Manual

Projector Setup Settings - Extended Menu
Extended > Whiteboard Settings > Save
s
Setting Options
Default Save USB
Location
Network
Always apply On
password
Off
Network Folder
Settings
Description
Sets the default save location for drawing
data. The selected location is displayed as
the default in whiteboard mode and is
used automatically in annotation mode.
Set to On to always set a password on a
file. When set to On, you can save files
only in whiteboard mode and as a PDF
or EWF format.
Sets the network folder.
Setting Options
CIFS Server
Shared Folder Path Shared Folder Path: sets the network
User name
Password
Check Connection

Whiteboard Settings Menu - Mail Menu

Settings on the Mail menu let you select the email settings.
221
Description
CIFS Server: enter the IP address or
FQDN (Fully Qualified Domain Name)
for the CIFS server. You can enter up to
63 alphanumeric characters (you cannot
use " * + , : ; < = > ? [ \ ] ` | and spaces).
You cannot use the following IP
addresses: 127.x.x.x, 192.9.2.x, or
224.0.0.0 through 255.255.255.255
(where x is a number from 0 to 255). If
you specify an FQDN, you must
configure a DNS server.
folder name in "share name\folder
name". You can enter up to 63
alphanumeric characters (you cannot use
" * / : < > ? and |).
User name: enter a user name that will
have read/write privileges on the network
folder. You can enter up to 64
alphanumeric characters (you cannot
use : and spaces). You can enter a
domain name by adding it before the
user name and separating them with a
backslash (domain\username).
Password: enter a password for the user
name. You can enter up to 64
alphanumeric characters (you cannot
use : and spaces). After you enter the
password and select Setup complete, the
password is displayed as an asterisk (*).
Check Connection: tests the network
connection.