List of Functions
Info Menu (Display Only)
Lets you check the status of the image signals being projected and the status
of the projector. Items that can be displayed vary depending on the source
currently being projected.
Submenu
You can display the cumulative lamp operating time
Lamp Hours
When the lamp replacement time is reached, the characters
are displayed in yellow.
You can display the source name for the connected
Source
equipment currently being projected.
You can display the content of Input Signal set in the
Input Signal
Signal menu according to the source.
Resolution
You can display the resolution.
You can display the settings for Video Signal in the Signal
Video Signal
menu.
You can display the refresh rate
Refresh Rate
Sync Info
You can display the image signal information.
This information may be needed if service is required.
Function
*
.
g
.
Submenu
Status
This is information about errors that have occurred on the
projector.
This information may be needed if service is required.
Displays the projector's serial number.
Serial Number
Event ID
Displays the application error log.
s "About Event ID"
*
The cumulative use time is displayed as "0H" for the first 10 hours. 10 hours
and above is displayed as "10H", "11H", and so on.
91
Function
p.110