Wired Lan Menu; Mail Menu - Epson EB-436Wi User Manual

List of Functions

Wired LAN menu

Sub-menu
IP Settings You can make settings related to the following addresses.
g
DHCP : Set to On to configure the network using DHCP. If this
is set to On, you cannot set any more addresses.
g
IP Address
projector. You can input a number from 0 to 255 in each field of
the address. However, the following IP addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
Subnet Mask
You can input a number from 0 to 255 in each field of the address.
However, the following subnet masks cannot be used.
0.0.0.0, 255.255.255.255
Gateway Address
for the projector. You can input a number from 0 to 255 in each
field of the address. However, the following gateway addresses
cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
To prevent the IP address from being displayed on Network Info
IP Address Dis
in the Network menu and on the LAN Standby screen, set this to
play
Off.

Mail menu

When this is set, you receive an email notification if a problem or warning
occurs in the projector.
Function
: You can input the IP address assigned to the
g
: You can input the subnet mask for the projector.
g
: You can input the IP address for the gateway
89