Wireless Lan Menu - Epson EB-4955WU User Manual

List of Functions
Submenu
PJLink Password Set a password to use when you access the projector using
compatible PJLink software.
You can enter up to 32 single-byte alphanumeric characters.
(Symbols cannot be used.)
s "About PJLink"
Set a password to use Web Remote. You can enter up to 8 single-
Web Control
byte alphanumeric characters. (* cannot be used)
Password
Web Remote is a computer function that allows you to operate
the projector by using the Web browser on a computer
connected on a network.
s "Changing Settings Using a Web Browser (Web Control)"
p.127
Projector Key- When set to On, you have to enter the keyword when you try to
word connect the projector to a computer via a network. As a result,
you can prevent presentations from being interrupted by
connections from other computers.
Normally this should be set to On.
EasyMP Network Projection Operation Guide
s

Wireless LAN menu

To connect the projector to a computer using a wireless LAN, install the
Wireless LAN unit (ELPAP07).
"Installing the Wireless LAN Unit"
s
Function
p.132
p.34
Submenu
Wireless LAN Set this to On when connecting the projector and a computer via
a wireless LAN. If you do not want to connect via wireless LAN,
Power
turn it Off to prevent unauthorized access by others.
Set the connection mode to use when connecting the projector
Connection
and a computer via a wireless LAN.
Mode
If you select Quick, a small network is created automatically by
the projector and computer. It is used with EasyMP Network
Projection. If SSID Auto Setting is set to On, the projector
becomes an easy access point; if it is set to Off, the network is
created in Ad hoc mode
connection is established in infrastructure mode
access point installed.
You can select the channels used to connect in Quick mode. If
Channel
interference from other signals occurs, use a different channel.
Sets the wireless LAN system. Normally this should be set to
Wireless LAN sys-
802.11b/g/n. The connection method is selected automatically
tem
according to the access point settings.
In an area that does not support 802.11n, only 802.11b/g is
displayed.
84
Function
g
. If you select Advanced, the
g
through the