Epson EB-4955WU User Manual page 134

Monitoring and Controlling
Button
A/V Mute Turns the video and audio on or off.
s "Hiding the Image and Sound Temporarily (A/V
Mute)"
B
Switch to the image from the selected input source. To display input sources that
are not shown in Source List, click (a) or (b) to scroll up or down. The current
video signal input source is displayed in blue.
You can change the source name if necessary.
C
You can perform the following operations when you click the buttons. To display
buttons that are not shown in Source List, click (c) or (d) to scroll left or right.
Button
Freeze Images are paused or unpaused.
s "Freezing the Image (Freeze)"
Contrast Adjusts the difference between light and shade in the
images.
Brightness Adjusts the image brightness.
Color Adjusts the color saturation for the images.
Sharpness Adjusts the image sharpness.
Zoom
Click the [z] button to enlarge the image without
changing the projection size. Click the [x] button to
reduce an image that was enlarged with the [z] button.
Click the [
position of an enlarged image.
s "Enlarging Part of the Image (E-Zoom)"
D
The [ ], [ ], [ ], and [ ] buttons perform the same operations as the [
[ ], [ ], and [ ] buttons on the remote control. You can perform the
following operations when you click the other buttons.
Function
p.56
Function
p.57
], [ ], [ ], or [ ] buttons to change the
p.57
Button
OK
Menu
Auto
Search
Esc
E
You can perform the following operations when you click the tabs.
Tab
Contact IT Help
Info
Tools
Using the tools window
],
The following window is displayed when you click the Tools tab on the
operation window. You can use this window to change settings in the
projector that is currently connected.
Function
Performs the same operation as the [
remote control.
s "Remote Control" p.12
Displays and closes the Configuration menu.
If clicked while projecting analog RGB signals from the
Computer port, you can automatically optimize
Tracking, Sync., and Position.
Changes to the next input source that is sending an
image.
s "Automatically Detect Input Signals and Change the
Projected Image (Source Search)" p.38
Performs the same operation as the [Esc] button on the
remote control.
s "Remote Control" p.12
Function
Displays the Help Desk window. Used to send messages
to, and receive messages from, the administrator using
®
Crestron RoomView Express.
Displays information on the projector that is currently
connected.
Changes settings in the projector that is currently
connected. See the next section.
134
] button on the