Easy Exit Seat; Power Reclining Seatbacks - Hummer H2 2010 Owner's Manual

Easy Exit Seat

To store the seat exit position:
1. Press and release the button 1. The seat will move
to the stored memory position.
2. Adjust the seat to the desired exit position.
3. Press and hold the exit button until a double chime
sounds to let you know that the position has been
stored.
A second seat exit position can be programmed by
repeating Steps 1 through 3 and pressing button 2.
(Easy Exit Seat): To use the seat exit position:
With the vehicle in P (Park), the driver's seat exit
position can be recalled by pressing the exit button. You
will hear a single beep, and the driver s seat will move
back approximately 8 cm (3 in). To move the seat back
further, press the exit button again until the seat is all
the way back.
If the easy exit seat feature is programmed in the Driver
Information Center (DIC), automatic seat movement will
occur when the key is removed from the ignition. See
Easy Exit Seat under DIC Vehicle Customization on
page 4 60 for more information.
2-8

Power Reclining Seatbacks

The front seats have power reclining seatbacks.
To recline the seatback, press the control toward
the rear of the vehicle .
To raise the seatback, press the control toward the
front of the vehicle .