Hummer H2 2010 Owner's Manual page 96

1. 5. Return the rear passenger side seatback to
its upright position. You may have to move
the child restraint to a temporary position to
do this. Ensure that the seatback locks and
the safety belt is routed properly. Then lower
the seat cushion until the seatback and the
seat cushion lock into position.
2. Attach the lower attachments to the lower anchors.
If the child restraint does not have lower
attachments or the desired seating position does
not have lower anchors, secure the child restraint
with the top tether and the safety belts. Refer to
your child restraint manufacturer instructions and
the instructions in this manual.
2. 1. Find the lower anchors for the desired
seating position.
2. 2. Attach and tighten the lower attachments on
the child restraint to the lower anchors.
3. Tighten the top tether.
2-58
WARNING:
If either seatback is not locked, it could move
forward in a sudden stop or crash. That could
cause injury to the person sitting there. Always
push and pull on the seatbacks to be sure they
are locked.
4. Push and pull the child restraint in different
directions to be sure it is secure.
Second and Third Row Positions
and SVA Special Edition
1. Attach and tighten the lower attachments to the
lower anchors. If the child restraint does not have
lower attachments or the desired seating position
does not have lower anchors, secure the child
restraint with the top tether and the safety belts.
Refer to your child restraint manufacturer
instructions and the instructions in this manual.
1. 1. Find the lower anchors for the desired
seating position.
1. 2. Put the child restraint on the seat.
1. 3. Attach and tighten the lower attachments on
the child restraint to the lower anchors.
SUV