Park Tilt Mirrors; Outside Convex Mirror; Outside Heated Mirrors - Hummer H2 2010 Owner's Manual

Park Tilt Mirrors

The vehicle's outside mirrors can also perform a park tilt
function. This causes the passenger and/or driver's
mirror to tilt to a preselected position when the vehicle
is in R (Reverse). This feature may be useful in viewing
the curb when parallel parking.
When the vehicle is shifted out of R (Reverse) and a
short delay has occurred, the passenger and/or driver's
mirror will return to its original position.
To change the preselected tilt position, adjust the
mirrors to the desired position while the vehicle is in
R (Reverse). When the vehicle is shifted out of
R (Reverse), this new position is saved in memory as
the tilt position.
This feature can be enabled/disabled through the Driver
Information Center. See DIC Vehicle Customization on
page 4 60 for more information.

Outside Convex Mirror

WARNING:
A convex mirror can make things, like other
vehicles, look farther away than they really are.
If you cut too sharply into the right lane, you could
hit a vehicle on the right. Check the inside mirror
or glance over your shoulder before changing
lanes.
The passenger side mirror is convex shaped. A convex
mirror's surface is curved so more can be seen from the
driver seat.

Outside Heated Mirrors

The vehicle may have outside heated mirrors which
help clear them of condensation, snow, and ice.
When the rear window defogger button is pressed, the
heated mirrors are also turned on. See Rear Window
Defogger under Dual Automatic Climate Control
System on page 4 17 for more information.
3-49