Flash-To-Pass; Windshield Wipers - Hummer H2 2010 Owner's Manual

Flash-to-Pass

Use your high-beam headlamps to signal to a driver in
front that you want to pass. It works even if the
headlamps are in the automatic position.
To use it, pull the turn signal lever toward you, then
release it.
If the headlamps are in the automatic position or on low
beam, the high-beam headlamps turn on. They stay on
as long as the lever is held. The high-beam indicator on
the instrument panel cluster comes on. Release the
lever to return to normal operation.
4-6

Windshield Wipers

The windshield wipers are controlled by turning the
z
band with on it.
8
(Mist): For a single wiping cycle, turn the band to
mist. Hold it there until the wipers start, then release.
For more wipes, hold the band on mist longer.
6
(Delay): The wiper speed can be set for a long or
short delay between wipes. Turn the band up or down
for a shorter or longer delay time.
6
(Low Speed): Slow wipes.
1
(High Speed): Fast wipes.
9
(Off): Turns the wipers off.