Unfolding The Seatback; Tilting The Seat - Hummer H2 2010 Owner's Manual

Unfolding the Seatback

WARNING:
If either seatback is not locked, it could move
forward in a sudden stop or crash. That could
cause injury to the person sitting there. Always
push and pull on the seatbacks to be sure they
are locked.
To return the seatback to the passenger position:
2. Push forward on the seatback to make sure it is
locked into position.
1. Pull up on the release
lever labeled 1 and
then pull up on the
seatback until the
seatback locks into the
upright position.

Tilting the Seat

1. Fold the seatback forward using the instructions
listed previously.
3. Lift the rear of the seat up from the floor and push
it forward until it locks into place. The seat cannot
be unlatched from the floor unless the seatback is
folded down.
The seat will now remain locked in the upright position.
2. Unlatch the seat from
the floor by pulling up
on the lever labeled 2,
located on the rear of
the seat.
2-15