Easy Exit Seat - Hummer H2 2009 Owner's Manual

To store the memory settings:
1. While the vehicle is in P (Park), adjust the driver
seat, including the seatback recliner, lumbar, and
side wing area, and both outside mirrors to a
comfortable position.
2. Press and hold button 1 until a double chime
sounds to let you know that the position has
been stored.
A second seating and mirror position can be programmed
by repeating Steps 1 and 2 and pressing button 2.
To recall the memory positions, the vehicle must be in
P (Park). Press and release either button 1 or button 2
corresponding to the desired driving position. A single
chime will sound and the memory position will be
recalled.
To stop recall movement of the memory seat feature at
any time, press one of the memory buttons or power
seat controls.

Easy Exit Seat

To store the seat exit position:
1. Press and release the button 1. The seat will move
to the stored memory position.
2. Adjust the seat to the desired exit position.
3. Press and hold the exit button until a double chime
sounds to let you know that the position has been
stored.
A second seat exit position can be programmed by
repeating Steps 1 through 3 and pressing button 2.
B
(Easy Exit Seat): To use the seat exit position:
•
Press the exit button on the memory control.
•
If this feature is activated in the DIC, removing the
key from the ignition will move the seat to the exit
position.
See "Easy Exit Seat" under DIC Vehicle Customization
on page 3-64 for more information on activating this
feature in the DIC.
1-7