Hummer H2 2010 Owner's Manual page 272

r j
/ (Play/Pause): Press either the play or pause
icon displayed on the radio system, to toggle between
pausing or restarting playback of a DVD. If the forward
arrow is showing on display, the system is in pause
mode. If the pause icon is showing on display, the
system is in playback mode. If the DVD screen is off,
press the play button to turn the screen on.
Some DVDs begin playing after the previews have
finished, although there could be a delay of up to
30 seconds. If the DVD does not begin playing the
movie automatically, press the pushbutton located
under the play/pause symbol tag displayed on the radio.
If the DVD still does not play, refer to the on-screen
instructions, if available.
c
(Stop): Press this button to stop playing,
rewinding, or fast forwarding a DVD.
r
(Enter): Press this button to select the choices
that are highlighted in any menu.
y
(Menu): Press this button to access the DVD menu.
The DVD menu is different on every DVD. Use the
softkeys located under the navigation arrows to
navigate the cursor through the DVD menu. After
making a selection press this button. This button only
operates when using a DVD.
4-86
Nav (Navigate): Press this button to display directional
arrows for navigating through the menus.
q
(Return): Press this button to exit the current
active menu and return to the previous menu. This
button operates only when a DVD is playing and a
menu is active.
DVD-A (Audio) Display Buttons
Once a DVD-A is inserted, radio display menu shows
several tag options for DVD playing. Press the softkeys
located under any desired tag option during DVD
playback. See the tag options listed after, for more
information.
The rear seat operator can navigate the DVD-A menus
and controls through the remote control. See Remote
Control , under Rear Seat Entertainment (RSE) System
on page 4 116 for more information. The Video Screen
does not automatically power on when the DVD-A is
inserted into the DVD slot. It must be manually turned
on by the rear seat occupant through the remote control
power button.
r j
/ (Play/Pause): Press either the play or pause
icon displayed on the radio system, to toggle between
pausing or restarting playback of a DVD. If the forward
arrow is showing on the display, the system is in pause
mode. If the pause icon is showing on the display, the
system is in playback mode.