Storing A Flat Or Spare Tire And Tools (Sut); Storing A Flat Or Spare Tire And Tools (Suv) - Hummer H2 2010 Owner's Manual

16. When you install the wheel and tire, you must also
reinstall the center cap. Place the cap on the wheel
and tap it into place until it sits flush with the
wheel.
15. Tighten the nuts firmly
in a crisscross
sequence as shown by
turning the wheel
wrench with the wheel
wrench extender
clockwise.
Storing a Flat or Spare Tire and
Tools (SUT)
Storing the Flat or Spare Tire
Use the following art and text to help you store the
spare or flat tire back into its proper location when you
are done.
To store the flat or spare tire on the tire carrier:
1. Close the tire carrier. See Tailgate/Spare Tire
Carrier on page 3 15 for tire carrier operation.
2. Place the flat or spare tire onto the tire carrier with
the outside of the wheel facing you.
3. Reinstall the wheel nuts holding the spare or flat
tire to the tire carrier. Tighten the nuts by hand.
6-99