Onstar; Navigation System; Radio Frequency Identification (Rfid); Radio Frequency Statement - Hummer H2 2010 Owner's Manual

HUMMER will not access this data or share it with
others except: with the consent of the vehicle owner or,
if the vehicle is leased, with the consent of the lessee;
in response to an official request of police or similar
government office; as part of HUMMER S defense of
litigation through the discovery process; or, as required
by law. Data that HUMMER collects or receives may
also be used for HUMMER research needs or may be
made available to others for research purposes, where
a need is shown and the data is not tied to a specific
vehicle or vehicle owner.
®

OnStar

If your vehicle has OnStar and you subscribe to the
OnStar services, please refer to the OnStar Terms and
Conditions for information on data collection and use.
®
See also the OnStar owner guide in this manual for
more information.

Navigation System

If your vehicle has a navigation system, use of the
system may result in the storage of destinations,
addresses, telephone numbers, and other trip
information. Refer to the navigation system operating
manual for information on stored data and for deletion
instructions.
8-18
Radio Frequency
Identification (RFID)
RFID technology is used in some vehicles for functions
such as tire pressure monitoring and ignition system
security, as well as in connection with conveniences
such as key fobs for remote door locking/unlocking and
starting, and in-vehicle transmitters for garage door
openers. RFID technology in HUMMER vehicles does
not use or record personal information or link with any
other HUMMER system containing personal
information.

Radio Frequency Statement

This vehicle has systems that operate on a radio
frequency that comply with Part 15 of the Federal
Communications Commission (FCC) Rules and with
RSS-210/211 of Industry Canada.
Operation is subject to the following two conditions:
1. The device may not cause interference.
2. The device must accept any interference received,
including interference that may cause undesired
operation of the device.
Changes or modifications to any of these systems by
other than an authorized service facility could void
authorization to use this equipment.