Adding Coolant - Hummer H2 2010 Owner's Manual

Adding Coolant

If more coolant is needed, add the proper DEX-COOL
coolant mixture at the surge tank, but only when the
engine is cool.
WARNING:
You can be burned if you spill coolant on hot
engine parts. Coolant contains ethylene glycol,
and it will burn if the engine parts are hot enough.
Do not spill coolant on a hot engine.
When replacing the pressure cap, make sure it is
hand-tight and fully seated.
How to Add Coolant to the Coolant
Surge Tank
®
If no problem is found, check to see if coolant is
visible in the surge tank. If coolant is visible but the
coolant level is not at or above the FULL COLD mark,
add a 50/50 mixture of clean, drinkable water and
®
DEX-COOL coolant at the coolant surge tank, but be
sure the cooling system, including the coolant surge
tank pressure cap, is cool before doing this. See Engine
Coolant on page 6 30 for more information.
6-33