Easy Exit Seat - Hummer H2 2004 Owner's Manual

The seat, radio station presets and mirror positions can
also be recalled when placing the key in the ignition
if programmed to do so through the Driver Information
Center (DIC). See DIC Operation and Displays
on page 3-44.
To stop recall movement of the memory seat feature at
any time, press one of the memory buttons or power
seat controls.

Easy Exit Seat

The controls for this memory function are located on the
driver's door.
B
(Easy Exit Seat): This button is used to program
and recall the desired driver's seat position when
exiting/entering the vehicle. The seat position, can be
personalized for both driver 1 and driver 2.
2-54
To store the seat exit position for driver 1 or 2, do
the following:
1. Press and release the 1 or 2 button or press the
unlock button on the desired remote keyless entry
transmitter. The seat will move to the stored
memory position.
2. Adjust the seat to the desired exit position.
3. Press and hold the exit button of the memory
control for three seconds. A double chime will sound
to let you know that the position has been stored
for the identified driver (1 or 2).
To use the seat exit position, do one of the following:
•
Press the exit button on the memory control.
•
Or, if this feature is activated in the DIC, then
remove the key from the ignition; the seat will then
move to the exit position.
See DIC Operation and Displays on page 3-44 for more
information on activating this feature in the DIC.