ProCurve# ping docservr
10.28.229.219 is alive, time = 1 ms
ProCurve# traceroute docservr
traceroute to 10.28.229.219
1 hop min, 30 hops max, 5 sec. timeout, 3 probes
1 10.28.192.2
2 10.28.229.219
Figure C-23. Example of Ping and Traceroute Execution for the Network in Figure C-21 on Page 54
ProCurve# ping docservr.pubs.outdoors.com
10.28.229.219 is alive, time = 1 ms
ProCurve# traceroute docservr.pubs.outdoors.com
traceroute to 10.28.229.219
1 10.28.192.2
2 10.28.229.219
Figure C-24. Example of Ping and Traceroute Execution When Only the DNS Server IP Address Is
Configured
1 ms
0 ms
Traceroute Target
As mentioned under "Basic Operation" on page C-50, if the DNS entry config
ured in the switch includes only the DNS server's IP address, you must use
the target host's fully qualified domain name with ping and traceroute. For
example, using the document server in figureC-21 as a target:
1 hop min, 30 hops max, 5 sec. timeout, 3 probes
1 ms
0 ms
First-Hop Router ("B")
0 ms
0 ms
0 ms
0 ms
0 ms
0 ms
0 ms
0 ms
Troubleshooting
Diagnostic Tools
Target's Fully Qualified
Domain Name
C-55