HP ProCurve Management And Configuration Manual page 452

Redundancy (Switch 8212zl)
Displaying Management Information
15-28
booted from on the next boot. Unlike executing the show version command
on an active management module, this only shows the running version of
software on the standby management module.
Standby Console> show version
Image stamp: /sw/code/build/btm(t2g)
Mar 21 2007 15:03:31
K.12.XX
1617
Boot Image: Primary
Figure 15-21. Example of Show Version Command for Standby Module
Was booted from
primary flash.