HP ProCurve Management And Configuration Manual page 230

Port Status and Configuration
Viewing Port Status and Configuring Port Parameters
10-10
Figure 10-6 shows sample output from the show tech transceivers command.
ProCurve# show tech transceivers
Transceiver Technical Information:
Port # | Type
-------+-----------+--------+------------------+----------
21 | 1000SX
22 | 1000LX
23 | ??
25 | 10GbE-CX4 | J8440A | US509RU079
26 | 10GbE-CX4 | J8440A | US540RU002
27 | 10GbE-LR
28 | 10GbE-SR
29 | 10GbE-ER
The following transceivers may not function correctly:
Port #
--------
Port 23
Figure 10-6. Example of Show Tech Transceivers Command
Operating Notes:
■ The following information is displayed for each installed transceiver:
• Port number on which transceiver is installed.
• Type of transceiver.
• Product number—Includes revision letter, such as A, B, or C. If no
revision letter follows a product number, this means that no revision
is available for the transceiver.
• Part number—Allows you to determine the manufacturer for a spec­
ified transceiver and revision number.
For a non-ProCurve installed transceiver (see line 23 Figure 10-6), no
■
transceiver type, product number, or part information is displayed. In the
Serial Number field, non-operational is displayed instead of a serial num­
ber.
■ The following error messages may be displayed for a non-operational
transceiver:
• Unsupported Transceiver. (SelfTest Err#060)
Check: www.hp.com/rnd/device_help/2_inform for
more info.
| Prod # | Serial #
| J4858B | CN605MP23K
| J4859C | H117E7X
| ?? | non operational
| J8437B | PPA02-2904:0017
| J8436B | 01591602
| J8438A | PPA03-2905:0001
Message
-------------------------------------
Self test failure.
| Part #
|
| 2157-2345
|
|
|
| 2157-2345
| 2158-1000
|