Removing The Oven Door; Replacing The Door Seal; Replacing A Defective Light Bulb; Removing Rack Guides - Wolf Convection Steam Oven Use & Care Manual

Convection Steam Oven Care
Cleaning

REMOVING THE OVEN DOOR

On occasion you may choose to completely remove the
oven door for a thorough cleaning. Please exercise
caution, as the door weighs approximately 18 lbs (8 kg).
To remove the oven door:
1) Open the oven door completely.
2) Flip the latches on both door hinges forward to the
open position. Refer to the illustration below.
3) Close the oven door to the at-rest position and lift
forward and out.
To reinstall the oven door:
1) From the front, guide both oven door hinges into the
openings.
2) Open the oven door as far as it will go and flip the
latches back to the closed position.
OPEN
POSITION
CLOSED
POSITION
Oven door hinge latch.

REPLACING THE DOOR SEAL

For safety reasons, the door seal must be replaced by
Wolf factory certified service.

REPLACING A DEFECTIVE LIGHT BULB

In the case of a defective light bulb please contact Wolf
factory certified service.

REMOVING RACK GUIDES

To remove rack guides:
1) Unscrew the knurled nuts in the front of the rack
guides in a counterclockwise direction.
2) Pull the rack guides to the side of the threaded studs
and remove from the front.
To reinstall rack guides:
1) Insert the rack guides into openings in the back wall of
the cooking space and position onto the threaded
studs.
2) Place the knurled nuts on the threaded studs and
tighten securely in a clockwise direction.
RACK GUIDE
KNURLED NUT
Remove rack guides.
37
wolfappliance.com