Wolf Convection Steam Oven Use & Care Manual page 39

Convection Steam Oven Care
Running the Descale Program
RUNNING THE DESCALE PROGRAM
For safety reasons, the descale program cannot be inter-
rupted or stopped once it is started.
1) Press the OFF button.
2) Press the control knob to activate the text display,
turn to descale, press to select. 'Descale—Descale
appliance' appears in the text display.
3) Press to select. 'Descale appliance—start' appears.
4) Press again to confirm. 'Add 1 pt
press OK' appears.
5) Pour the entire contents of the descaler solution bottle
into the water tank. Position the water tank into the
water tank compartment.
6) Press the control knob to confirm. 'Descale appli-
ance—running' appears in the text display. After about
30 minutes, 'Pour away descaler—Add 2 pt
appears in the text display.
7) Remove the water tank and fill with cold tap water to
cool and dilute the solution before pouring it down the
drain.
Failure to dilute the solution before discarding may
discolor sink and drain.
descaler—and
(0.5 L)
water'
(1 L)
8) Fill the tank with cold tap water and reinsert it into the
compartment. The rinsing phase starts automatically.
'Descale appliance—1st rinsing cycle' appears in the
text display. After about 45 minutes 'Pour away
water—Descaling completed' appears in the text
display. Depending on the level of soil in the rinse
water, the oven will determine whether additional rinse
cycles are necessary. If prompted, follow the directions
on the screen for additional rinse cycles.
9) Once the rinse cycles are complete, remove, empty
and dry the water tank. If necessary, wipe the bottom
of the cooking space with a soft cloth.
39
wolfappliance.com