Pre-Installation Requirements; Preinstallation Tasks To Complete At The Customer Site; Verifying That All The Required Equipment Is On Site - Avaya S8500 Installing And Configuring

- Installation and Upgrades for the Avaya G700 Media Gateway and Avaya S8300
Media Server (555-234-100)
- Avaya IA 770 INTUITY AUDIX Messaging Application Administering the S8300 and
S8400 Media Servers to work with IA 770
Return to this document and see:
●
!
Important:
If the S8500 Media Server is configured as an LSP, skip the following section.
Important:
- IP interface configuration
- Install an S8500 Media Server as an LSP
configured as an LSP.
- Postinstallation administration
- Installation verification
- Media server access
- Installation troubleshooting

Pre-installation requirements

This section describes the tasks that you must complete before you start the installation. You
complete certain tasks before you go on site and other tasks at the site.

Preinstallation tasks to complete at the customer site

Before you start the installation, you must:
Verify that all the required equipment is on site
●
Ensure that the preinstallation team completed the preinstallation tasks
●

Verifying that all the required equipment is on site

Compare the list of items that were ordered to the contents of the boxes to verify that you have
all the equipment. Your project manager can give you an inventory list. Do not rely on the
packing slips inside the boxes for the correct information.
Installing and Configuring the Avaya S8500 Media Server
on page 53 to program the IP interface.
on page 63 if the S8500 Media Server is
on page 69
on page 77
on page 87
on page 97 if problems occur during the installation.
Pre-installation requirements
February 2007
9